Yes. That is very interesting…
- Some
guys is trying to use HTX connector to add co-processor card.
- Some
guys is using GPU on PCI-E…
Current code treat that coproc as one extra
HT chain…
YH
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Justin C. Darby
Sent: Monday, May 22, 2006 7:21 AM
To: Stefan Reinauer
Cc: [email protected]; Steve
Casselman; Lu, Yinghai
Subject: Re: [LinuxBIOS] co
processor support and other
I think he's talking
about enabling the use of:
http://www.drccomputer.com/pages/products.html
with the board. That chip has already had my interest for awhile. :)
Justin
On 5/22/06, Stefan
Reinauer <[EMAIL PROTECTED]>
wrote:
* Lu, Yinghai <[EMAIL PROTECTED]>
[060518 19:16]:
> Just check in
> 1. r2308: Option CONFIG_CONSOLE_VGA_ONBOARD_AT_FIRST
> It decides use onboard VGA or add on
vga adapter
> 2. r2309: reduce clear ECC time from 2.1x to 1.1x. need to enable
> SERIAL_CPU_INIT
> 3. r2310: enable ht chain for drc co processor in s2891.
>
> Please check that.
>
> Steve,
> I still wonder how do you init the memory on your co processor without
> the spd rom access. ( hard coded)
What coprocessor is that? A Xilinx FPGA? Are 2891 delivered with those
per default? Can LinuxBIOs fuel them with code now?
This sounds _very_ interesting.
Stefan
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761
7664613
Email: [EMAIL PROTECTED] •
http://www.coresystems.de/
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
|
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
