On Thursday 28 September 2006 21:51, ollie wrote: > On Thu, 2006-09-28 at 21:09 +0200, Philipp Degler wrote: > > Am Donnerstag, 28. September 2006 19:49 schrieb ollie: > > > On Thu, 2006-09-28 at 18:03 +0200, Philipp Degler wrote: > > > > Am Mittwoch, 27. September 2006 22:20 schrieb ollie: > > > > > On Wed, 2006-09-27 at 21:13 +0200, Philipp Degler wrote: > > > > > > Right now we have all on-board devices working. Even xorg shows > > > > > > up. Only exception is native vga-bios. It gets loaded but just a > > > > > > few lines of LB-boot are printed. Anyway at least our HTX adaptor > > > > > > card is working :) > > > > > > > > > > Any serial console log when it is initializing VGA? > > > > > > > > I attached you the capture file of my console log if i boot with > > > > option CONFIG_CONSOLE_VGA = 1 > > > > option CONFIG_PCI_ROM_RUN = 1 > > > > option CONFIG_CONSOLE_BTEXT = 0 > > > > > > > > instead of > > > > option CONFIG_CONSOLE_VGA = 0 > > > > option CONFIG_PCI_ROM_RUN = 0 > > > > option CONFIG_CONSOLE_BTEXT = 1 > > > > > > > > to mention. I can already see something on the screen. > > > > > > The log looks alright. What is the problem exactly? > > > > The last line of the log is also the last line on the screen. After this > > last line "for IRQ, reg 0x00000017 value 0x00010000 0x00000000" the > > system hangs completely. > > Does this happen when VGA is disabled? no, and if we use "dir /drivers/ati/ragexl" we even have xorg running. Switching on CONFIG_PCI_ROM_RUN and CONFIG_CONSOLE_VGA leads to this behavior.
We prepared rom image as described in the online vga howto. > > Where does these lines come from? Your modification to LB? > > Ollie -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
