Kurt André Selbach wrote: > Thanks, for the answers, i managed to get the vgabios running when i > inserted the extracted vgabios (from awardeco) and inserted it with > the dd command. > > My next problem is trying to boot from my usb device using FILO version > 0.5 from this "link" svn://openbios.org/filo/trunk/filo-0.5 > > "FILO version 0.5 ([EMAIL PROTECTED]) Fri Nov 10 02:05:10 CET 2006 > Press <Enter> for default boot, or <Esc> for boot prompt... 1mlinuz > root=/dev/sda1 console=tty0 console=ttyS0nd UHCI at 1800 > uhc_reset: Resetting UHCI > uhc_init: uhc_init setting framelist to: 1decb9f0 > uhc_start: Starting UHCI > dump_uhci: HCI at 00001800 > uhc_init: Found UHCI at 1820 > uhc_reset: Resetting UHCI" > > The computer now "hangs" no boot nothing. > > Using the filo from ehterboot, it get's to the "LinuxLabs USB > bootloader" and that's as far as it goes. > > Stock award bios managed to boot from this usbstick, > What could be wrong, any suggestions?!
yhlu once pointed me to this http://www.linuxbios.org/index.php/Etherboot Thanks! -- Al -- linuxbios mailing list linuxbios@linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios