> [EMAIL PROTECTED] wrote: >> >> Hello, >> I wish to carry out the same thing but for the motherboard >> advantech/pcm-5823, >> he exist in v1 but not in v2, all the chip is already listed in V2 >> except the >> winbond W83977AF. >> Can someone point me in the right direction ? > > If you already have the hardware to test with (bios savior or extra > chips) try creating a target and using winbond w83977tf (ie just tell > linuxbios that's what it is). From a quick look at the source, it > doesn't seem there is anything that should block it from working. Even > if it doesn't work, but everything else works, VGA and USB should still > work, unless a failed superio causes it to hang, but again looking at > the source it doesn't seem it should. You just won't have any serial or > PS/2 ports until you do get it working. > > -Corey >
Yes I have a chip programmator. I don't understand if it's possible tu use the source of v1 en test it directly (on the web for the v1 it are noted like nonfunctional), or if I must modify the files to function with the v2 ? For me if the VGA, the USB, and the network (rtl8139c) work it's sufficient. Thank's by advance for your help, Ccases -- linuxbios mailing list linuxbios@linuxbios.org http://www.openbios.org/mailman/listinfo/linuxbios