* David H. Barr <[EMAIL PROTECTED]> [070320 03:36]:
> In any case, I tried with the -w switch and obtained similar results to Adam
> Kaufman's [2] until my verify failed at 0x000164d0. I also tried Stefan
> Reinauer's checklist [3], but again verification failed at the same location
> with the switch in the RD1 position. With the switch in the ORG position,
> verification succeeded.
>
> Just for grins, I erased the chip then performed a verify against the image
> I first tried to flash. This also failed, again at 0x000164d0. It
> seems as though none of my commands actually -wrote- anything.
So the original image is 0xff in the first 164d0 bytes? Or did you brick
the machine this way?
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: [EMAIL PROTECTED] • http://www.coresystems.de/
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
