[EMAIL PROTECTED] wrote: >> Hi all, >> >> I have an little question, the size of the chip (bios) is declare only in >> the ../targets/<mother>/<board>/Config.lb at the line ROM_IMAGE_SIZE, or >> is in other config file, because when y compil the size of my >> linuxbios.rom is 128ko , but my chip is an 256ko, and ROM_IMAGE_SIZE is >> déclare at 256*1024, >> >> thank's by adavance for your help, >> >> regards >> >> Ccases >> >> >> -- >> linuxbios mailing list >> [email protected] >> http://www.linuxbios.org/mailman/listinfo/linuxbios >> > > Sorry it's ROM_SIZE not ROM_IMAGE_SIZE everywhere > >
In the target Config.lb, you should have ROM_SIZE = 256*1024 (or you can calculate it out), which I see you have, and I've got ROM_IMAGE_SIZE = 0x10000. The options in Options.lb and Config.lb (in src/...) should, in theory, never have to be changed for a different flash part size. If you're only building a fallback image, you'll have to adjust FALLBACK_SIZE in Options.lb to be the size of the whole flash part (256*1024), and also modify failover.c to only boot the fallback image, is that maybe where the problem is? -Corey -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
