Hi Beth Am Donnerstag, 12. April 2007 14:17 schrieben Sie: > Hi all again (hi ST, yes I am Jose, Beth is a long story :D, some day ...). Nice hearing from you :-)
> Well I am a bit "disconnected", but, ST are you still interested on > that I check the pins of the second socket?. Yes! Especially if you could check the Pins where i have written Error? or s.t. like that. Please take a look at: http://private.vlsi.informatik.tu-darmstadt.de/st/dual_bios_GA-m57SLI-S4.jpg and read my mail from the 29.03.2007 00:23:"GA-M57SLI-S4 dual bios pins was Re: New with a GA-M57SLI-S4". It would be really nice if you could recheck: * all the "Error?" pins * If #init is connected to some of the T1X or T2X pins (labeling according to the linked image above). * If any of the T3X or T4x pins is really not connected to the pads / flash. * If any of the "Watchdog" pins are connected to any of the TXX pins. > What about your discoveries about the #init pin? See bullet point #1 in the above list. > Another thing, ST, I bought the chip, an extraction tool and a socket > from http://bios-repair.co.uk/ , I had a very fluid communication and > no problems at all with Paul. Mh, ok. I've got an PLCC32 socket but no bios chip right now :-(. Thanks ST -- linuxbios mailing list [EMAIL PROTECTED] http://www.linuxbios.org/mailman/listinfo/linuxbios