> [EMAIL PROTECTED] wrote: >> I have test to use the early_mtrr_init(), no positive result. No com >> port >> for now. >> >> If somebody has an idea > > Check in your factory BIOS, make sure it isn't set up to swap COM 1 and > 2? Or even better, check for output from the second serial port? I'm > pretty much out of ideas. >
Sorry for the late answer, I have test this solution and no change. > > Do you have a POST card? If so, set up a post code at the start of > w83977af_early_serial() so you can make sure LinuxBIOS is in fact making > it that far. Do a post code with outb(0x[code], 0x80); > For this question the POST is Power-On Self-Test, but I don't know what is the POST card !!! Thanks for our help. Regards Ccases -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios