On Fri, 2007-04-27 at 00:49 +0200, Uwe Hermann wrote: > On Wed, Apr 25, 2007 at 07:26:21PM -0700, roger wrote: > > I don't know if the above are listed in an order that states these > > postcodes should be reported on the device or any order, but I do get > > the following reported on my postcard in order: > > > > 0x80, 0x88, E7 > > 0x80, 0x88, 27 > > 0x80, 0x88, A1, AC > > How does your POST card look like? Does it only display two digits or > more? Or are the above numbers meant as a series of POST codes?
2 digits. so... 80 88 E7 Has been the norm after specifying the interrupts and correcting the iobase of the ttyS0 port in auto.c My latest build, will do the following after a warm reboot and yanking all by 1 sticking of memory: 80 88 E7 12 (or sometimes 11) I don't know if this is progress or not. Or even if it's just encountering a memory bug before console init? > (also, why 0x80 but E7 without the "0x"?) Just denoting hex as it's coded. :-/ Just got my other Bios Savior today for my Tyan S1832DL and will give this 440BX a try. No need to specify the SuperIO as I've already verified it's the same as the S1846 you've been working on. So my S1832DL *should* give me something on serial without too much trouble. I'll try to start building a new tree tomorrow. Really, I don't see why the DFI P2XBL 440bx isn't giving output as it's been with it's SuperIO chip since LinuxBiosv1. All I can think of it's a bug before console init or bug with enabling early_ttyS0. :-/ -- Roger http://www.eskimo.com/~roger/index.html Key fingerprint = 8977 A252 2623 F567 70CD 1261 640F C963 1005 1D61 Thu Apr 26 22:24:55 PDT 2007 -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios