On 5/16/07, Jeremy Jackson <[EMAIL PROTECTED]> wrote: > Thanks for the reply, see below: > > On Wed, 2007-05-16 at 09:20 -0700, yhlu wrote: > > 1. use smp 64bit kernel. > > I have Ubuntu feisty kernel, 2.6.20-14-generic #2 SMP, which shows 2 > CPUs with an AMD Athlon64 X2 4600+. Do I need any other kernel config > options?
Why not use kernel from kernel.org? > > > 2. s2865 onboard NIC is in silicon, so please refer irq routing in > > s2895 or s2891 etc. > > Oh yes the onboard NIC works great, as does the tg3, all 3 PCI-e slots, > onboard video. DME1737 hwmon works. sound works. PCI slot one has all > four interrupts working. > > What doesn't work yet is: > 1) PCI slots 2-4 > -there doesn't seem to be any interrupts generated. slot 2 and 4 can do > ifconfig up, but don't transmit or receive any packets. slot 3 refuses > to ifconfig up. > > 2)firewire (it's on PCI bus, so it's probably related to 1) gets no > interrupts. If the module is reloaded, dmesg fills the screen endlessly > and hard reset is required. without schematic, that will need some try and test to figure out. > 3) SATA doesn't detect connected drives, and shows 0 > in /proc/interrupts. This is a mystery to me as all other CK804 devices > worked first try. current ck804 support in LinuxBIOS only support port 0, and port 2. > > 4) DME1737 watchdog. there isn't a linux driver yet. I expect to port > one of the other SMSC linux drivers soon. > > 5) MSI interrupts don't work, on vendor BIOS or LinuxBIOS. some MSI to > HT mappings aren't set up. CK804 has problem to use MSI, MCP55 NIC will use MSI well. YH -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
