What I found is that with a correct mptable.c, I get 1 slot working. I can verify the physical wiring of the INT[A-D] pins of the other 3 slots, and make correct mptable entries for those, but they are unable to generate interrupts.
Maybe when you have your mptable working you can try out all 3 slots and post the results, Thanks, Jeremy On Wed, 2007-05-23 at 14:46 +0200, Philipp Degler wrote: > actually the asus board has 3 pci slots. I plugged in a 3com network card. > The > device was found and the module loaded but the assignment of an interrupt > failed. I would assume this is an mptable issue. > > http://people.redhat.com/zaitcev/linux/ > On this page you will find a tool called mptable that might help generating > a valid mptable.c > I already tried to get it right but no success so far :(. The mptable of asus > a8n-e commercial bios seems to buggy though. -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios