Otávio Alcântara wrote: > I used a dissambly and there is no jump in the reset vector. I've tried > other board (amd rumba, using the same tools JTAG and memory > programmer) and it starts normaly the boot process, just don't finish it > because the processor is a Geode GX and my board is a LX one. I'll try > the norwich board that is similar to mine. > The problem I saw with msm800 is that linuxbios.rom is not on a valid > format, the file doesn't size like the ROM_SIZE option of > targets/../../Config.lb. > > Thanks, > > Otávio >
Are you using buildrom? http://linuxbios.org/Buildrom It is recommended to use it for LX systems. It should handle putting the VSA image with the LB binary to make the complete image. Marc > On 5/23/07, *ron minnich* <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > The first thing I ever do with problems of this type is simple: > hexdump romimage > > and see if I see a jump at end. > > ron > > > > > -- > Otávio Alcântara > "I'll never cross to the Dark Side." > -- Marc Jones Senior Software Engineer (970) 226-9684 Office mailto:[EMAIL PROTECTED] http://www.amd.com/embeddedprocessors -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios