Am Montag 28 Mai 2007 schrieb Luc Verhaegen: > On Mon, May 28, 2007 at 04:32:33PM +0200, Peter Stuge wrote: > > On Mon, May 28, 2007 at 10:30:53AM +0200, Markus Boas wrote: > > > The interessting thing is that the Flashrom tool dedectet a > > > Epia M/MII Board > > > > flashrom can only guess, unfortunately. The heuristics used are > > quite broad in some cases so any board with the right chips can > > look just like the EPIA-M/MII boards. Sorry about this. > > > > We should change the wording in flashrom output to reflect this. > > Did it say Epia M/MII or did it say Epia M/MII/...? If i didn't write > the latter there, i made a mistake, as i should have.
Found chipset "VT8235": Enabling flash write... OK. Found board "VIA EPIA M/MII/...": Enabling flash write... OK. > > This is all because VIA had no clue about pci subsystem ids at the time. > This idiocy persists across newer generations of epia boards too, > although there recently was some evidence that VIA finally understood > this. > > Also... Most of the embedded devices based on the CLE266 + C3, they > usually carry those same ids. Ain't that cute? > > Luc Verhaegen. -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
