1. custom board based on the broadcom blast. 2. via PCIX bridge internally in the ht2000
Thomas 2007/5/30, yhlu <[EMAIL PROTECTED]>: > 1. Blast based, what doesn't mean? > 2. your broadcom is PCIX or PCI-E? > > YH > > On 5/30/07, Thomas Ekstrand <[EMAIL PROTECTED]> wrote: > > Hi! > > > > I have this error: > > --snip-- > > tg3: eth0: No interrupt was generated using MSI, switching to INTx mode. > > Please > > report this failure to the PCI maintainer and include system chipset > > information. > > tg3: eth1: No interrupt was generated using MSI, switching to INTx mode. > > Please > > report this failure to the PCI maintainer and include system chipset > > information. > > --snip-- > > > > How can I get the interrupt to go through MSI? > > Currently there are no interrupts at all. > > I'm running on broadcom blast based board with the bcm5780/5785 chipset > > > > regards > > Thomas > > > > -- > > linuxbios mailing list > > [email protected] > > http://www.linuxbios.org/mailman/listinfo/linuxbios > > > -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
