Jonathan Sturges wrote: > Hi, > I'm making progress getting LB working on a Geode GX1-based winterm. > I'm getting very close to creating a new target for this terminal, but > for the moment am working with the eaglelion/5bcm target, as it's nearly > identical. > So I thought I'd try the new CS5530 code from last month, but I'm having > IDE troubles. Even with: > > register "ide0_enable" = "1" > register "ide1_enable" = "1" > > ...in my Config.lb, my system's Primary IDE gets disabled, and the > Secondary enabled. > > The 5530 patch looks correct to me, so I don't think that's it. I also > double-checked that the CS5530 uses the same bits and register for > enabling the IDE controllers as the CS5530A, which of course it does. > > Any thoughts on what to check next? I'm eager to try the new code. > > thanks, > Jonathan >
Following up on my own question, I found the problem. There was a misplaced 'end' in the mainboard's Config.lb that was causing the ideX_enable register settings to be out of context. -Jonathan -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios