Can you please post a patch with all your changes to the code or config
files (if any) and a full boot log (get it via serial console) with
maximum debug level enabled?
And/or can you try with another PCI VGA card to see if it makes a
difference?
Thanks, Uwe.
Well, I dug up an ancient ATI card and installed it with similar results
as when using my GForce 8600 card. For some reason X refuses to start.
I have attached my FILO Config file, my LinuxBIOS2 Config.lb file, the
boot output from the serial port, and the Xorg log.
Also, two observations:
1. I tried to use a 20 year old dumb terminal (NABU 4503) to monitor
serial output. The terminal could only handle a maximum of 19200 baud
which was too slow for LinuxBIOS output stream - all characters were
garbled. Once FILO took over the output was readable. Anyway I scrapped
the terminal and now use a PC with minicom at 115200 baud.
2. Kernel loading is slow but initrd loading is very, very, slow.
John
===============
# Use grub instead of autoboot?
USE_GRUB = 1
# Grub menu.lst path
# hde is filo for sda (1st sata drive)
MENULST_FILE = "hde3:/boot/grub/lbmenu.lst"
# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
IDE_DISK = 1
# Add a short delay when polling status registers
# (required on some broken SATA controllers)
IDE_DISK_POLL_DELAY = 1
# Driver for USB Storage
USB_DISK = 1
# VGA text console
VGA_CONSOLE = 1
PC_KEYBOARD = 1
# Enable the serial console
SERIAL_CONSOLE = 1
# Serial console; real external serial port
SERIAL_IOBASE = 0x3f8
# SERIAL_SPEED = 19200
# Filesystems
FSYS_EXT2FS = 1
# FSYS_REISERFS = 1
# FSYS_ISO9660 = 1
# Support for boot disk image in bootable CD-ROM (El Torito)
# ELTORITO = 1
# PCI support
SUPPORT_PCI = 1
# Enable this to scan PCI busses above bus 0
# AMD64 based boards do need this.
PCI_BRUTE_SCAN = 1
# Loader for standard Linux kernel image, a.k.a. /vmlinuz
LINUX_LOADER = 1
##
## This file is part of the LinuxBIOS project.
##
## Copyright (C) 2007 AMD
## Written by Yinghai Lu <[EMAIL PROTECTED]> for AMD.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
target m57sli
mainboard gigabyte/m57sli
romimage "normal"
option CONFIG_CONSOLE_VGA=1
option CONFIG_PCI_ROM_RUN=1
option USE_FAILOVER_IMAGE=0
option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x20000
option XIP_ROM_SIZE=0x40000
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
# Enable the Serial Console
option CONFIG_CONSOLE_SERIAL8250=1
# option TTYS0_BAUD=19200
# Select the serial console base port
option TTYS0_BASE=0x3f8
# This defaults to 8 data bits, 1 stop bit, and no parity
option TTYS0_LCS=0x3
payload ../../../payloads/filo.elf
end
romimage "fallback"
option CONFIG_CONSOLE_VGA=1
option CONFIG_PCI_ROM_RUN=1
option USE_FAILOVER_IMAGE=0
option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x20000
option XIP_ROM_SIZE=0x40000
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
payload ../../../payloads/filo.elf
end
romimage "failover"
option USE_FAILOVER_IMAGE=1
option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=FAILOVER_SIZE
option XIP_ROM_SIZE=FAILOVER_SIZE
option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover"
end
#buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover"
LinuxBIOS-2.0.0_m57sli_Fallback Tue Jul 24 12:07:33 EDT 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 3104121204160202
end msr fid, vid 3104120404160216
mcp55_num:01
ht reset -
LinuxBIOS-2.0.0_m57sli_Fallback Tue Jul 24 12:07:33 EDT 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 3104120404160216
end msr fid, vid 3104120404160216
mcp55_num:01
Ram1.00
Ram2.00
Unbuffered
400Mhz
Interleaved
RAM: 0x00400000 KB
Ram3
dimm_mask = 00000033
x4_mask = 00000000
x16_mask = 00000000
single_rank_mask = 00000000
ODC = 00113322
Addr Timing= 00202520
Initializing memory: done
RAM: 0x00500000 KB
Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 3, base: 2048MB, range: 1024MB, type WB
set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=1d done
set DQS timing:DQSPos: 00 done
set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=34 done
Total DQS Training : tsc [00]=00000000562bc080
Total DQS Training : tsc [01]=0000000058a567ea
Total DQS Training : tsc [02]=000000012eb2bd1a
Total DQS Training : tsc [03]=0000000130f9f9b2
Ram4
v_esp=000ceeb8
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to RAM.
src=fffdf000
dst=00100000
linxbios_ram.nrv2b length = 0000d5d4
linxbios_ram.bin length = 000225b0
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0_m57sli_Fallback Tue Jul 24 12:07:33 EDT 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:01.0 [10de/0360] enabled
PCI: 00:01.1 [10de/0368] enabled
PCI: 00:01.2 [10de/036a] enabled
PCI: 00:01.3 [10de/036b] enabled
PCI: 00:02.0 [10de/036c] enabled
PCI: 00:02.1 [10de/036d] enabled
PCI: 00:04.0 [10de/036e] enabled
PCI: 00:05.0 [10de/037f] enabled
PCI: 00:05.1 [10de/037f] enabled
PCI: 00:05.2 [10de/037f] enabled
PCI: 00:06.0 [10de/0370] enabled
PCI: 00:06.1 [10de/0371] enabled
PCI: 00:08.0 [10de/0373] enabled
PCI: 00:0a.0 [10de/0376] enabled
PCI: 00:0b.0 [10de/0374] enabled
PCI: 00:0c.0 [10de/0374] enabled
PCI: 00:0d.0 [10de/0378] enabled
PCI: 00:0e.0 [10de/0375] enabled
PCI: 00:0f.0 [10de/0377] enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 disabled
PNP: 002e.4 enabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
PCI: pci_scan_bus for bus 01
PCI: pci_scan_bus returning with max=001
PCI: pci_scan_bus for bus 02
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: 07:00.0 [10de/0400] enabled
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
done
Allocating resources...
Reading resources...
PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io
PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem
PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem
PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
Done reading resources.
Allocating VGA resource PCI: 07:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0f.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f71fffff] mem <node 0 link 0>
PCI: 00:01.0 14 <- [0x00f7144000 - 0x00f7144fff] mem
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.4 60 <- [0x0000000290 - 0x0000000297] io
PNP: 002e.4 62 <- [0x0000000230 - 0x0000000237] io
PNP: 002e.4 70 <- [0x0000000009 - 0x0000000009] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq
PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io
PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io
PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io
PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io
PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io
PCI: 00:01.3 10 <- [0x00f7100000 - 0x00f713ffff] mem
PCI: 00:02.0 10 <- [0x00f7145000 - 0x00f7145fff] mem
PCI: 00:02.1 10 <- [0x00f714a000 - 0x00f714a0ff] mem
PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io
PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io
PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io
PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io
PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io
PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io
PCI: 00:05.0 24 <- [0x00f7146000 - 0x00f7146fff] mem
PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io
PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io
PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io
PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io
PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io
PCI: 00:05.1 24 <- [0x00f7147000 - 0x00f7147fff] mem
PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io
PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io
PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io
PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io
PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io
PCI: 00:05.2 24 <- [0x00f7148000 - 0x00f7148fff] mem
PCI: 00:06.1 10 <- [0x00f7140000 - 0x00f7143fff] mem
PCI: 00:08.0 10 <- [0x00f7149000 - 0x00f7149fff] mem
PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io
PCI: 00:08.0 18 <- [0x00f714b000 - 0x00f714b0ff] mem
PCI: 00:08.0 1c <- [0x00f714c000 - 0x00f714c00f] mem
PCI: 00:0f.0 1c <- [0x0000001000 - 0x0000001fff] bus 07 io
PCI: 00:0f.0 24 <- [0x00e0000000 - 0x00efffffff] bus 07 prefmem
PCI: 00:0f.0 20 <- [0x00f4000000 - 0x00f70fffff] bus 07 mem
PCI: 07:00.0 10 <- [0x00f6000000 - 0x00f6ffffff] mem
PCI: 07:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64
PCI: 07:00.0 1c <- [0x00f4000000 - 0x00f5ffffff] mem64
PCI: 07:00.0 24 <- [0x0000001000 - 0x000000107f] io
PCI: 07:00.0 30 <- [0x00f7000000 - 0x00f701ffff] romem
PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 00:00.0 subsystem <- 1022/2b80
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 subsystem <- 1022/2b80
PCI: 00:01.0 cmd <- 14f
mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
mcp55 lpc decode:PNP: 002e.4, base=0x00000290, end=0x00000297
mcp55 lpc decode:PNP: 002e.4, base=0x00000230, end=0x00000237
mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
PCI: 00:01.1 subsystem <- 1022/2b80
PCI: 00:01.1 cmd <- 141
PCI: 00:01.2 cmd <- 540
PCI: 00:01.3 cmd <- 142
PCI: 00:02.0 subsystem <- 1022/2b80
PCI: 00:02.0 cmd <- 142
PCI: 00:02.1 subsystem <- 1022/2b80
PCI: 00:02.1 cmd <- 142
PCI: 00:04.0 subsystem <- 1022/2b80
PCI: 00:04.0 cmd <- 141
PCI: 00:05.0 subsystem <- 1022/2b80
PCI: 00:05.0 cmd <- 143
PCI: 00:05.1 subsystem <- 1022/2b80
PCI: 00:05.1 cmd <- 143
PCI: 00:05.2 subsystem <- 1022/2b80
PCI: 00:05.2 cmd <- 143
PCI: 00:06.0 bridge ctrl <- 0a03
PCI: 00:06.0 cmd <- 144
PCI: 00:06.1 subsystem <- 1022/2b80
PCI: 00:06.1 cmd <- 142
PCI: 00:08.0 subsystem <- 1022/2b80
PCI: 00:08.0 cmd <- 143
PCI: 00:0a.0 bridge ctrl <- 0003
PCI: 00:0a.0 cmd <- 140
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 140
PCI: 00:0c.0 bridge ctrl <- 0003
PCI: 00:0c.0 cmd <- 140
PCI: 00:0d.0 bridge ctrl <- 0003
PCI: 00:0d.0 cmd <- 140
PCI: 00:0e.0 bridge ctrl <- 0003
PCI: 00:0e.0 cmd <- 140
PCI: 00:0f.0 bridge ctrl <- 000b
PCI: 00:0f.0 cmd <- 147
PCI: 07:00.0 cmd <- 143
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00006000, offset=0x00110000, code_size=0x0000005b
Initializing CPU #0
CPU: vendor AMD device 40f33
CPU: family 0f, model 43, stepping 03
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
CPU model AMD Processor model unknown
Setting up local apic... apic_id: 0x00 done.
ECC Disabled
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device 40f33
CPU: family 0f, model 43, stepping 03
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
CPU model AMD Processor model unknown
Setting up local apic... apic_id: 0x01 done.
CPU #1 Initialized
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 00:01.0 init
set power on after power fail
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
PNP: 002e.1 init
PNP: 002e.4 init
FAN_CTL: reg = 0x02a9, read value = 0x50
FAN_CTL: reg = 0x02a9, writing value = 0xd7
PNP: 002e.5 init
PNP: 002e.6 init
PCI: 00:01.1 init
PCI: 00:02.1 init
PCI: 00:04.0 init
IDE0
PCI: 00:05.0 init
SATA S SATA P
PCI: 00:05.1 init
SATA S SATA P
PCI: 00:05.2 init
SATA S SATA P
PCI: 00:06.0 init
dev_root mem base = 0x00e0000000
[0x50] <-- 0xe0000000
PCI: 00:06.1 init
base = f7140000
codec_mask = 01
codec viddid: 10ec0883
No verb!
PCI: 00:08.0 init
MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:0d.0 init
PCI: 00:0e.0 init
PCI: 00:0f.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:01.2 init
PCI: 00:01.3 init
PCI: 07:00.0 init
rom address for PCI: 07:00.0 = f7000000
copying VGA ROM Image from 0xf7000000 to 0xc0000, 0xda00 bytes
entering emulator
halt_sys: file
/home/selmys/seneca/072/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 00000274
Moving GDT to 0x500...ok
Adjust low_table_end from 0x00000530 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote linuxbios table at: 00000530 - 00000de8 checksum 4410
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffc0000 - 0xfffdefff
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
New segment addr 0x100000 size 0x3afe0 offset 0xc0 filesize 0x10fc8
(cleaned up) New segment addr 0x100000 size 0x3afe0 offset 0xc0 filesize 0x10fc8
New segment addr 0x13afe0 size 0x48 offset 0x110a0 filesize 0x48
(cleaned up) New segment addr 0x13afe0 size 0x48 offset 0x110a0 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x00000000bff80000 memsz: 0x000000000003afe0 filesz:
0x0000000000010fc8
Clearing Segment: addr: 0x00000000bff90fc8 memsz: 0x000000000002a018
Loading Segment: addr: 0x00000000bffbafe0 memsz: 0x0000000000000048 filesz:
0x0000000000000048
Jumping to boot code at 0x10c98c
FILO version 0.5 ([EMAIL PROTECTED]) Tue Jul 24 12:05:13 EDT 2007
menu: hde4:/boot/grub/lbmenu.lst
hde: LBA48 120GB: WDC WD1200JD-00HBB0
Mounted ext2fs
Mounted ext2fs
Found Linux version 2.6.22 ([EMAIL PROTECTED]) #1 SMP Tue Jul 10 17:07:13 EDT
2007 bzImage.
Loading kernel... ok
Loading initrd... ok
Jumping to entry point...
Linux version 2.6.22 ([EMAIL PROTECTED]) (gcc version 4.1.2 20070502 (Red Hat
4.1.2-12)) #1 SMP Tue Jul 10 17:07:13 EDT 2007
Command line: root=/dev/sda3 ro acpi_use_timer_override console=tty0
console=ttyS0,115200
BIOS-provided physical RAM map:
BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable)
BIOS-e820: 0000000000100000 - 00000000c0000000 (usable)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
end_pfn_map = 1310720
DMI not present or invalid.
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
Zone PFN ranges:
DMA 1 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1310720
early_node_map[4] active PFN ranges
0: 1 -> 160
0: 192 -> 240
0: 256 -> 786432
0: 1048576 -> 1310720
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: GIGABYTE MPTABLE: Product ID: M57SLI MPTABLE: APIC at:
0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
I/O APIC #2 at 0xF7144000.
Setting APIC routing to flat
Processors: 2
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000c0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000c0000000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:40000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 43208 bytes of per cpu data
Built 1 zonelists. Total pages: 1029337
Kernel command line: root=/dev/sda3 ro acpi_use_timer_override console=tty0
console=ttyS0,115200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 3000.016 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
CPU 0: aperture @ f0000000 size 64 MB
Memory: 4128244k/5242880k available (2318k kernel code, 65864k reserved, 1362k
data, 320k init)
Calibrating delay using timer specific routine.. 6002.61 BogoMIPS (lpj=3001305)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from
ACPI tables [20070126]
ACPI: Unable to load the System Description Tables
Using local APIC timer interrupts.
result 12500074
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5999.19 BogoMIPS (lpj=2999596)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Processor model unknown stepping 03
Brought up 2 CPUs
migration_cost=303
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Using IRQ router default [10de/0370] at 0000:00:06.0
PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:01.3[B] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 22
PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 20
PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:05.2[C] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:06.1[B] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22
PCI->APIC IRQ transform: 0000:07:00.0[A] -> IRQ 17
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f0000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0f.0
IO window: 1000-1fff
MEM window: f4000000-f70fffff
PREFETCH window: e0000000-efffffff
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3085k freed
audit: initializing netlink socket (disabled)
audit(1185311416.972:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
usbcore: registered new interface driver libusual
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Processor model unknown processors (version 2.00.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 320k freed
Write protecting the kernel read-only data: 1048k
Red Hat nash version 6.0.9 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
LoUSB Universal Host Controller Interface driver v3.0
ading uhci-hcd.ko module
Loadinohci_hcd 0000:00:02.0: OHCI Host Controller
g ohci-hcd.ko moohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
dule
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7145000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
Loading ehci-hcdehci_hcd 0000:00:02.1: EHCI Host Controller
.ko module
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf714a000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
Loading mbcache.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading libata.ko module
Loading sata_nv.ko module
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x0000000000013000 ctl 0x0000000000013072 bmdma
0x0000000000012cd0 irq 20
ata2: SATA max UDMA/133 cmd 0x0000000000013010 ctl 0x0000000000013082 bmdma
0x0000000000012cd8 irq 20
usb 1-9: new low speed USB device using ohci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: Host Protected Area detected:
current size: 234439535 sectors
native size: 234441648 sectors
ata1.00: ATA-6: WDC WD1200JD-00HBB0, 08.02D08, max UDMA/133
ata1.00: 234439535 sectors, multi 0: LBA48
ata1.00: Host Protected Area detected:
current size: 234439535 sectors
native size: 234441648 sectors
ata1.00: configured for UDMA/133
usb 1-9: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:02.0-9
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: Host Protected Area detected:
current size: 625140335 sectors
native size: 625142448 sectors
ata2.00: ATA-7: ST3320620SV, 3.ACG, max UDMA/133
ata2.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: Host Protected Area detected:
current size: 625140335 sectors
native size: 625142448 sectors
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD1200JD-00H 08.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234439535 512-byte hardware sectors (120033 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 0:0:0:0: [sda] 234439535 512-byte hardware sectors (120033 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access ATA ST3320620SV 3.AC PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 625140335 512-byte hardware sectors (320072 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 1:0:0:0: [sdb] 625140335 512-byte hardware sectors (320072 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x0000000000013020 ctl 0x0000000000013092 bmdma
0x0000000000012ce0 irq 23
ata4: SATA max UDMA/133 cmd 0x0000000000013030 ctl 0x00000000000130a2 bmdma
0x0000000000012ce8 irq 23
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x0000000000013040 ctl 0x00000000000130b2 bmdma
0x0000000000012cf0 irq 21
ata6: SATA max UDMA/133 cmd 0x0000000000013050 ctl 0x00000000000130c2 bmdma
0x0000000000012cf8 irq 21
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Waiting for driver initialization.
Loading ata_generic.ko module
Loading pata_amdscsi6 : pata_amd
.ko module
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma
0x0000000000012cc0 irq 14
ata8: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma
0x0000000000012cc8 irq 15
ata7.00: ATAPI: HL-DT-STDVD-RAM GSA-H54N, 1.00, max UDMA/66
ata7.00: limited to UDMA/33 due to 40-wire cable
ata7.00: configured for UDMA/33
scsi 6:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H54N 1.00 PQ: 0 ANSI: 5
Waiting for driver initialization.
Trying to resume from LABEL=SWAP-sda2
No suspend signature on swap, not resuming.
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
Setting up otherEXT3-fs: mounted filesystem with ordered data mode.
filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
SELinux: Disabled at runtime.
audit(1185311426.887:2): selinux=0 auid=4294967295
INIT: version 2.86 booting
Welcome to Fedora
Press 'I' to enter interactive startup.
Setting clock (localtime): Tue Jul 24 21:10:30 EDT 2007 [ OK ]
Starting udev: [ OK ]
Loading default keymap (us): [ OK ]
Setting hostname amdx2: [ OK ]
No devices found
Setting up Logical Volume Management: No volume groups found
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda3
/1: clean, 333611/12210528 files, 3520645/12209400 blocks
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/sdb1
/home: clean, 399442/39075840 files, 27757182/78142160 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling local filesystem quotas: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 5
Entering non-interactive startup
Starting background readahead (early, fast mode): [ OK ]
Checking for hardware changes [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0... done.
[ OK ]
Starting auditd: [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting irqbalance: [ OK ]
Starting rpcbind: [ OK ]
Starting NFS statd: [ OK ]
Starting RPC idmapd: [ OK ]
Starting system message bus: [ OK ]
[ OK ] Bluetooth services:[ OK ]
Mounting other filesystems: [ OK ]
Starting PC/SC smart card daemon (pcscd): [ OK ]
Starting hidd: [ OK ]
Starting autofs: Loading autofs4: [ OK ]
Starting automount: [ OK ]
[ OK ]
Starting hpiod: [ OK ]
Starting hpssd: [ OK ]
Starting cups: [ OK ]
Starting sshd: [ OK ]
Starting xinetd: [ OK ]
Starting ntpd: [ OK ]
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
Network Audio System Release 1.9
[ OK ]
Starting ConsoleKit: [ OK ]
Starting crond: [ OK ]
Starting xfs: [ OK ]
Starting anacron: [ OK ]
Starting atd: [ OK ]
Starting background readahead (later, fast mode): [ OK ]
Starting dhcdbd:[ OK ]
Starting libvirtd daemon: [ OK ]
Starting yum-updatesd: Bridge firewalling registered
[ OK ]
Starting Avahi daemon... ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
[ OK ]
Starting HAL daemon: [ OK ]
Starting smartd: [ OK ]
�������������������������������������������������������������
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Fedora Core 7 Red Hat, Inc.
Current Operating System: Linux amdx2 2.6.22 #1 SMP Tue Jul 10 17:07:13 EDT 2007 x86_64
Build Date: 11 June 2007
Build ID: xorg-x11-server 1.3.0.0-9.fc7
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 24 21:11:31 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) FontPath set to:
unix/:7100,
built-ins
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib64/xorg/modules"
(**) Option "Xinerama" "0"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7be760
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib64/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,0369 card 1022,2b80 rev a1 class 05,00,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0360 card 1022,2b80 rev a2 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0368 card 1022,2b80 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:01:2: chip 10de,036a card 1022,2b80 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:01:3: chip 10de,036b card 0000,0000 rev a2 class 0b,40,00 hdr 80
(II) PCI: 00:02:0: chip 10de,036c card 1022,2b80 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,036d card 1022,2b80 rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,036e card f022,2b80 rev a1 class 01,01,8a hdr 00
(II) PCI: 00:05:0: chip 10de,037f card 1022,2b80 rev a2 class 01,01,85 hdr 80
(II) PCI: 00:05:1: chip 10de,037f card 1022,2b80 rev a2 class 01,01,85 hdr 80
(II) PCI: 00:05:2: chip 10de,037f card 1022,2b80 rev a2 class 01,01,85 hdr 80
(II) PCI: 00:06:0: chip 10de,0370 card 0000,0000 rev a2 class 06,04,00 hdr 81
(II) PCI: 00:06:1: chip 10de,0371 card 1022,2b80 rev a2 class 04,03,00 hdr 80
(II) PCI: 00:08:0: chip 10de,0373 card 1022,2b80 rev a2 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 10de,0376 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0b:0: chip 10de,0374 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,0374 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,0378 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,0375 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 10de,0377 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 07:00:0: chip 10de,0400 card 19f1,0480 rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:6:0), (0,1,1), BCTRL: 0x0a03 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,2), BCTRL: 0x0003 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:11:0), (0,3,3), BCTRL: 0x0003 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:12:0), (0,4,4), BCTRL: 0x0003 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:13:0), (0,5,5), BCTRL: 0x0003 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:14:0), (0,6,6), BCTRL: 0x0003 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 7: bridge is at (0:15:0), (0,7,7), BCTRL: 0x000b (VGA_EN is set)
(II) Bus 7 I/O range:
[0] -1 0 0x00001000 - 0x00001fff (0x1000) IX[B]
(II) Bus 7 non-prefetchable memory range:
[0] -1 0 0xf4000000 - 0xf70fffff (0x3100000) MX[B]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(--) PCI: (0:1:3) nVidia Corporation MCP55 SMU rev 162, Mem @ 0xf7100000/18
(--) PCI:*(7:0:0) nVidia Corporation unknown chipset (0x0400) rev 161, Mem @ 0xf6000000/24, 0xe0000000/28, 0xf4000000/25, I/O @ 0x1000/7, BIOS @ 0xf7000000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xf714c000 - 0xf714c00f (0x10) MX[B]
[1] -1 0 0xf714b000 - 0xf714b0ff (0x100) MX[B]
[2] -1 0 0xf7149000 - 0xf7149fff (0x1000) MX[B]
[3] -1 0 0xf7140000 - 0xf7143fff (0x4000) MX[B]
[4] -1 0 0xf7148000 - 0xf7148fff (0x1000) MX[B]
[5] -1 0 0xf7147000 - 0xf7147fff (0x1000) MX[B]
[6] -1 0 0xf7146000 - 0xf7146fff (0x1000) MX[B]
[7] -1 0 0xf714a000 - 0xf714a0ff (0x100) MX[B]
[8] -1 0 0xf7145000 - 0xf7145fff (0x1000) MX[B]
[9] -1 0 0xf7144000 - 0xf7144fff (0x1000) MX[B]
[10] -1 0 0xf7000000 - 0xf701ffff (0x20000) MX[B](B)
[11] -1 0 0xf4000000 - 0xf5ffffff (0x2000000) MX[B](B)
[12] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[13] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[14] -1 0 0xf7100000 - 0xf713ffff (0x40000) MX[B]
[15] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
[16] -1 0 0x00002cf0 - 0x00002cff (0x10) IX[B]
[17] -1 0 0x000030c0 - 0x000030c3 (0x4) IX[B]
[18] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
[19] -1 0 0x000030b0 - 0x000030b3 (0x4) IX[B]
[20] -1 0 0x00003040 - 0x00003047 (0x8) IX[B]
[21] -1 0 0x00002ce0 - 0x00002cef (0x10) IX[B]
[22] -1 0 0x000030a0 - 0x000030a3 (0x4) IX[B]
[23] -1 0 0x00003030 - 0x00003037 (0x8) IX[B]
[24] -1 0 0x00003090 - 0x00003093 (0x4) IX[B]
[25] -1 0 0x00003020 - 0x00003027 (0x8) IX[B]
[26] -1 0 0x00002cd0 - 0x00002cdf (0x10) IX[B]
[27] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
[28] -1 0 0x00003010 - 0x00003017 (0x8) IX[B]
[29] -1 0 0x00003070 - 0x00003073 (0x4) IX[B]
[30] -1 0 0x00003000 - 0x00003007 (0x8) IX[B]
[31] -1 0 0x00002cc0 - 0x00002ccf (0x10) IX[B]
[32] -1 0 0x00002c80 - 0x00002cbf (0x40) IX[B]
[33] -1 0 0x00002c40 - 0x00002c7f (0x40) IX[B]
[34] -1 0 0x00002c00 - 0x00002c3f (0x40) IX[B]
[35] -1 0 0x00001000 - 0x0000107f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf714c000 - 0xf714c00f (0x10) MX[B]
[1] -1 0 0xf714b000 - 0xf714b0ff (0x100) MX[B]
[2] -1 0 0xf7149000 - 0xf7149fff (0x1000) MX[B]
[3] -1 0 0xf7140000 - 0xf7143fff (0x4000) MX[B]
[4] -1 0 0xf7148000 - 0xf7148fff (0x1000) MX[B]
[5] -1 0 0xf7147000 - 0xf7147fff (0x1000) MX[B]
[6] -1 0 0xf7146000 - 0xf7146fff (0x1000) MX[B]
[7] -1 0 0xf714a000 - 0xf714a0ff (0x100) MX[B]
[8] -1 0 0xf7145000 - 0xf7145fff (0x1000) MX[B]
[9] -1 0 0xf7144000 - 0xf7144fff (0x1000) MX[B]
[10] -1 0 0xf7000000 - 0xf701ffff (0x20000) MX[B](B)
[11] -1 0 0xf4000000 - 0xf5ffffff (0x2000000) MX[B](B)
[12] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[13] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[14] -1 0 0xf7100000 - 0xf713ffff (0x40000) MX[B]
[15] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
[16] -1 0 0x00002cf0 - 0x00002cff (0x10) IX[B]
[17] -1 0 0x000030c0 - 0x000030c3 (0x4) IX[B]
[18] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
[19] -1 0 0x000030b0 - 0x000030b3 (0x4) IX[B]
[20] -1 0 0x00003040 - 0x00003047 (0x8) IX[B]
[21] -1 0 0x00002ce0 - 0x00002cef (0x10) IX[B]
[22] -1 0 0x000030a0 - 0x000030a3 (0x4) IX[B]
[23] -1 0 0x00003030 - 0x00003037 (0x8) IX[B]
[24] -1 0 0x00003090 - 0x00003093 (0x4) IX[B]
[25] -1 0 0x00003020 - 0x00003027 (0x8) IX[B]
[26] -1 0 0x00002cd0 - 0x00002cdf (0x10) IX[B]
[27] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
[28] -1 0 0x00003010 - 0x00003017 (0x8) IX[B]
[29] -1 0 0x00003070 - 0x00003073 (0x4) IX[B]
[30] -1 0 0x00003000 - 0x00003007 (0x8) IX[B]
[31] -1 0 0x00002cc0 - 0x00002ccf (0x10) IX[B]
[32] -1 0 0x00002c80 - 0x00002cbf (0x40) IX[B]
[33] -1 0 0x00002c40 - 0x00002c7f (0x40) IX[B]
[34] -1 0 0x00002c00 - 0x00002c3f (0x40) IX[B]
[35] -1 0 0x00001000 - 0x0000107f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf714c000 - 0xf714c00f (0x10) MX[B]
[5] -1 0 0xf714b000 - 0xf714b0ff (0x100) MX[B]
[6] -1 0 0xf7149000 - 0xf7149fff (0x1000) MX[B]
[7] -1 0 0xf7140000 - 0xf7143fff (0x4000) MX[B]
[8] -1 0 0xf7148000 - 0xf7148fff (0x1000) MX[B]
[9] -1 0 0xf7147000 - 0xf7147fff (0x1000) MX[B]
[10] -1 0 0xf7146000 - 0xf7146fff (0x1000) MX[B]
[11] -1 0 0xf714a000 - 0xf714a0ff (0x100) MX[B]
[12] -1 0 0xf7145000 - 0xf7145fff (0x1000) MX[B]
[13] -1 0 0xf7144000 - 0xf7144fff (0x1000) MX[B]
[14] -1 0 0xf7000000 - 0xf701ffff (0x20000) MX[B](B)
[15] -1 0 0xf4000000 - 0xf5ffffff (0x2000000) MX[B](B)
[16] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[17] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[18] -1 0 0xf7100000 - 0xf713ffff (0x40000) MX[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
[22] -1 0 0x00002cf0 - 0x00002cff (0x10) IX[B]
[23] -1 0 0x000030c0 - 0x000030c3 (0x4) IX[B]
[24] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
[25] -1 0 0x000030b0 - 0x000030b3 (0x4) IX[B]
[26] -1 0 0x00003040 - 0x00003047 (0x8) IX[B]
[27] -1 0 0x00002ce0 - 0x00002cef (0x10) IX[B]
[28] -1 0 0x000030a0 - 0x000030a3 (0x4) IX[B]
[29] -1 0 0x00003030 - 0x00003037 (0x8) IX[B]
[30] -1 0 0x00003090 - 0x00003093 (0x4) IX[B]
[31] -1 0 0x00003020 - 0x00003027 (0x8) IX[B]
[32] -1 0 0x00002cd0 - 0x00002cdf (0x10) IX[B]
[33] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
[34] -1 0 0x00003010 - 0x00003017 (0x8) IX[B]
[35] -1 0 0x00003070 - 0x00003073 (0x4) IX[B]
[36] -1 0 0x00003000 - 0x00003007 (0x8) IX[B]
[37] -1 0 0x00002cc0 - 0x00002ccf (0x10) IX[B]
[38] -1 0 0x00002c80 - 0x00002cbf (0x40) IX[B]
[39] -1 0 0x00002c40 - 0x00002c7f (0x40) IX[B]
[40] -1 0 0x00002c00 - 0x00002c3f (0x40) IX[B]
[41] -1 0 0x00001000 - 0x0000107f (0x80) IX[B](B)
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) NVIDIA GLX Module 100.14.11 Wed Jun 13 17:16:40 PDT 2007
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "nvidia"
(II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib64/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) NVIDIA dlloader X Driver 100.14.11 Wed Jun 13 16:35:28 PDT 2007
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 07:00:0
(WW) NVIDIA: No matching Device section for instance (BusID PCI:0:1:3) found
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf714c000 - 0xf714c00f (0x10) MX[B]
[5] -1 0 0xf714b000 - 0xf714b0ff (0x100) MX[B]
[6] -1 0 0xf7149000 - 0xf7149fff (0x1000) MX[B]
[7] -1 0 0xf7140000 - 0xf7143fff (0x4000) MX[B]
[8] -1 0 0xf7148000 - 0xf7148fff (0x1000) MX[B]
[9] -1 0 0xf7147000 - 0xf7147fff (0x1000) MX[B]
[10] -1 0 0xf7146000 - 0xf7146fff (0x1000) MX[B]
[11] -1 0 0xf714a000 - 0xf714a0ff (0x100) MX[B]
[12] -1 0 0xf7145000 - 0xf7145fff (0x1000) MX[B]
[13] -1 0 0xf7144000 - 0xf7144fff (0x1000) MX[B]
[14] -1 0 0xf7000000 - 0xf701ffff (0x20000) MX[B](B)
[15] -1 0 0xf4000000 - 0xf5ffffff (0x2000000) MX[B](B)
[16] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[17] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[18] -1 0 0xf7100000 - 0xf713ffff (0x40000) MX[B]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
[22] -1 0 0x00002cf0 - 0x00002cff (0x10) IX[B]
[23] -1 0 0x000030c0 - 0x000030c3 (0x4) IX[B]
[24] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
[25] -1 0 0x000030b0 - 0x000030b3 (0x4) IX[B]
[26] -1 0 0x00003040 - 0x00003047 (0x8) IX[B]
[27] -1 0 0x00002ce0 - 0x00002cef (0x10) IX[B]
[28] -1 0 0x000030a0 - 0x000030a3 (0x4) IX[B]
[29] -1 0 0x00003030 - 0x00003037 (0x8) IX[B]
[30] -1 0 0x00003090 - 0x00003093 (0x4) IX[B]
[31] -1 0 0x00003020 - 0x00003027 (0x8) IX[B]
[32] -1 0 0x00002cd0 - 0x00002cdf (0x10) IX[B]
[33] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
[34] -1 0 0x00003010 - 0x00003017 (0x8) IX[B]
[35] -1 0 0x00003070 - 0x00003073 (0x4) IX[B]
[36] -1 0 0x00003000 - 0x00003007 (0x8) IX[B]
[37] -1 0 0x00002cc0 - 0x00002ccf (0x10) IX[B]
[38] -1 0 0x00002c80 - 0x00002cbf (0x40) IX[B]
[39] -1 0 0x00002c40 - 0x00002c7f (0x40) IX[B]
[40] -1 0 0x00002c00 - 0x00002c3f (0x40) IX[B]
[41] -1 0 0x00001000 - 0x0000107f (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf714c000 - 0xf714c00f (0x10) MX[B]
[5] -1 0 0xf714b000 - 0xf714b0ff (0x100) MX[B]
[6] -1 0 0xf7149000 - 0xf7149fff (0x1000) MX[B]
[7] -1 0 0xf7140000 - 0xf7143fff (0x4000) MX[B]
[8] -1 0 0xf7148000 - 0xf7148fff (0x1000) MX[B]
[9] -1 0 0xf7147000 - 0xf7147fff (0x1000) MX[B]
[10] -1 0 0xf7146000 - 0xf7146fff (0x1000) MX[B]
[11] -1 0 0xf714a000 - 0xf714a0ff (0x100) MX[B]
[12] -1 0 0xf7145000 - 0xf7145fff (0x1000) MX[B]
[13] -1 0 0xf7144000 - 0xf7144fff (0x1000) MX[B]
[14] -1 0 0xf7000000 - 0xf701ffff (0x20000) MX[B](B)
[15] -1 0 0xf4000000 - 0xf5ffffff (0x2000000) MX[B](B)
[16] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[17] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[18] -1 0 0xf7100000 - 0xf713ffff (0x40000) MX[B]
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
[25] -1 0 0x00002cf0 - 0x00002cff (0x10) IX[B]
[26] -1 0 0x000030c0 - 0x000030c3 (0x4) IX[B]
[27] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
[28] -1 0 0x000030b0 - 0x000030b3 (0x4) IX[B]
[29] -1 0 0x00003040 - 0x00003047 (0x8) IX[B]
[30] -1 0 0x00002ce0 - 0x00002cef (0x10) IX[B]
[31] -1 0 0x000030a0 - 0x000030a3 (0x4) IX[B]
[32] -1 0 0x00003030 - 0x00003037 (0x8) IX[B]
[33] -1 0 0x00003090 - 0x00003093 (0x4) IX[B]
[34] -1 0 0x00003020 - 0x00003027 (0x8) IX[B]
[35] -1 0 0x00002cd0 - 0x00002cdf (0x10) IX[B]
[36] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
[37] -1 0 0x00003010 - 0x00003017 (0x8) IX[B]
[38] -1 0 0x00003070 - 0x00003073 (0x4) IX[B]
[39] -1 0 0x00003000 - 0x00003007 (0x8) IX[B]
[40] -1 0 0x00002cc0 - 0x00002ccf (0x10) IX[B]
[41] -1 0 0x00002c80 - 0x00002cbf (0x40) IX[B]
[42] -1 0 0x00002c40 - 0x00002c7f (0x40) IX[B]
[43] -1 0 0x00002c00 - 0x00002c3f (0x40) IX[B]
[44] -1 0 0x00001000 - 0x0000107f (0x80) IX[B](B)
[45] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[46] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Enabling PCI device
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1920x1200 +0+0; 640x480 +0+0"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): The NVIDIA kernel module does not appear to be receiving
(EE) NVIDIA(0): interrupts generated by the NVIDIA graphics device
(EE) NVIDIA(0): PCI:7:0:0. Please see Chapter 8: Common Problems in the
(EE) NVIDIA(0): README for additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
