Generally, I2C mux has some external pins to set its address. In my Tyan S3992, the address is 0x71, so the function activate_spd_rom is called before accessing SPD.
Best Regards ??? Feng Libo @ AMD Ext: 20906 Mobile Phone: 13683249071 Office Phone: 0086-010-62801406 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joseph Smith Sent: Monday, August 13, 2007 2:09 AM To: Stefan Reinauer Cc: Corey Osgood; linuxbios@linuxbios.org Subject: Re: [LinuxBIOS] Read SPD issue Quoting Stefan Reinauer <[EMAIL PROTECTED]>: > * Joseph Smith <[EMAIL PROTECTED]> [070812 19:49]: >> SPD would show up at 0x50 or 0x51 right? It doesn't appear there is >> SPD on the on-board memory.I only show items at 0x2d (sensor) and >> 0x69 (clock chip). > > Are these devices (sensor, clock chip) identified? Any chance there is > an i2c mux somewhere? > Not sure, what is the typical address for a i2c mux? I can probe for it. The only other device i think there is, is the on-board tv-out chip, and I think that is at 0x88. How come lm-sensors default is to only probe between address range 0x03-0x77? Thanks - Joe -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios