Quoting Peter Stuge <[EMAIL PROTECTED]>: > On Tue, Aug 14, 2007 at 12:30:14PM -0400, Joseph Smith wrote: >> > On Tue, Aug 14, 2007 at 12:06:25PM -0400, Joseph Smith wrote: >> >> lspci-tvv >> >> -[0000:00]-+-1e.0-[0000:01]----08.0 Intel Corporation 82801DB PRO/100 >> >> VE (CNR) Ethernet Controller >> >> >> >> How the heck do I set this up in Config.lb? HELP?? >> > >> > Looks like it's been done before: >> > >> > --8<-- src/mainboard/asus/mew-vm/Config.lb >> > chip southbridge/intel/i82801xx # Southbridge >> > device pci 1e.0 on # PCI Bridge >> > #chip drivers/pci/onboard >> > # device pci 1.0 on end >> > # register "rom_address" = "0xfff80000" >> > #end >> > end >> > .. >> > end >> > -->8-- >> >> Does that mean I would have to cat in a ethernet rom? > > Do you or the chip need one? Is there one in the factory BIOS or in a > standalone flash chip or none at all? > > >> Also, wouldn't it be device pci 08.0 on end > > Yep. I only looked for the PCI-PCI bridge. > > > //Peter > I don't need an ethernet rom. Etherboot would take care of that correct? But in the config above it is alocating 0xfff80000 for a PCI rom, correct? My VGA bios is already using 0xfff80000.
Thanks - Joe -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios