Jonathan Sturges wrote: > My apologies, forgot to update the subject line! > > >>> One thing I'd like to investigate as well is initializing the IRQ router in >>> LB. I've seen some discussion about this in the past, and I've come to the >>> conclusion that for Geode GX1/CS5530 systems, it should be initialized in >>> LB rather than Linux. It also seems like some LB ports do this, and others >>> do not. >>> >> Linux does not know the CS5530 as an IRQ router. So it does not change >> anything in its registers settings. For this chipset Linux relies on the >> BIOS. Or you must patch the kernel. How to make LB fill in the routing >> registers with usefull values? >> >> Juergen >> > > Looking at newer Geode targets, some of the CS5536 systems seem to update the > IRQ steering registers; see write_pirq_routing_table() in > src/mainboard/artecgroup/dbe61/irq_tables.c. I think that block of code > could be adapted to the CS5530. Is it pretty much understood that setting > the IRQ steering registers within that function is the right place? > > -Jonathan > > Sounds like the right place to me. Marc
-- Marc Jones Senior Firmware Engineer (970) 226-9684 Office mailto:[EMAIL PROTECTED] http://www.amd.com/embeddedprocessors -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
