Uwe Hermann wrote: > On Sun, Sep 23, 2007 at 08:45:22AM -0400, Corey Osgood wrote: > >> [EMAIL PROTECTED]:~/superiotool# ./superiotool -d >> Found Fintek F71805 (vid=0x3419, id=0x0604) at port=0x4e >> No dump available for this Super I/O >> >> ??? >> > > That's expected, the -d functionality is not yet implemented for > the Fintek Super I/Os. You can add it if you want, it's just > a huge list of registers and their defaults as per datasheet. >
I'll look at it if I get some time (not likely soon) > Can you try -D, please? That _should_ work, but maybe I broke it. > > Yep, that works: [EMAIL PROTECTED]:~/superiotool# ./superiotool -D Found Fintek F71805 (vid=0x3419, id=0x0604) at port=0x4e Fintek F71805 Flash write is disabled. Flash control is 0x0008. 27=20 29=00 2a=ff 2b=ff UART1 is enabled UART1 base=03f8, irq=04, mode=RS232 UART2 is enabled UART2 base=02f8, irq=03, mode=RS232 PARPORT is enabled PARPORT base=0378, irq=07 HW monitor is enabled HW monitor base=0295, irq=00 GPIO is enabled GPIO 70=ff, e0=ff, e1=ff, e2=ff, e3=ff, e4=ff, e5=ff GPIO e6=ff, e7=ff, e8=ff, e9=ff, f0=ff, f1=ff, f3=ff, f4=ff GPIO f5=ff, f6=ff, f7=ff, f8=ff -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios