On Thu, Sep 27, 2007 at 03:56:20PM +0200, Carl-Daniel Hailfinger wrote: > > Please provide a diff between dmesg under LB and proprietary BIOS. I > suspect some keyboard init is done differently.
Here. -- Robert Millan <GPLv2> I know my rights; I want my phone call! <DRM> What use is a phone call, if you are unable to speak? (as seen on /.)
--- dmesg_lb 2007-09-28 21:13:12.000000000 +0200 +++ dmesg_bios 2007-09-28 21:13:12.000000000 +0200 @@ -1,50 +1,76 @@ Linux version 2.6.22-2-686 (Debian 2.6.22-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007 BIOS-provided physical RAM map: - BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) - BIOS-e820: 0000000000100000 - 0000000060000000 (usable) -640MB HIGHMEM available. + BIOS-e820: 0000000000000000 - 000000000009f800 (usable) + BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) + BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) + BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) + BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) + BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) + BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) + BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) +639MB HIGHMEM available. 896MB LOWMEM available. -found SMP MP-table at 00000010 -Entering add_active_range(0, 0, 393216) 0 entries of 256 used +found SMP MP-table at 000f5650 +Entering add_active_range(0, 0, 393200) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 - HighMem 229376 -> 393216 + HighMem 229376 -> 393200 early_node_map[1] active PFN ranges - 0: 0 -> 393216 -On node 0 totalpages: 393216 + 0: 0 -> 393200 +On node 0 totalpages: 393200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 - HighMem zone: 1280 pages used for memmap - HighMem zone: 162560 pages, LIFO batch:31 -DMI not present or invalid. + HighMem zone: 1279 pages used for memmap + HighMem zone: 162545 pages, LIFO batch:31 +DMI 2.3 present. +ACPI: RSDP 000F76C0, 0014 (r0 Nvidia) +ACPI: RSDT 5FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) +ACPI: FACP 5FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) +ACPI: DSDT 5FFF3180, 6264 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) +ACPI: FACS 5FFF0000, 0040 +ACPI: SRAT 5FFF9500, 0090 (r1 AMD HAMMER 1 AMD 1) +ACPI: MCFG 5FFF9600, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) +ACPI: APIC 5FFF9440, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override -Intel MultiProcessor Specification v1.4 - Virtual Wire compatibility mode. -OEM ID: ASUS Product ID: A8NE APIC at: 0xFEE00000 +ACPI: PM-Timer IO Port: 0x4008 +ACPI: Local APIC address 0xfee00000 +ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 -I/O APIC #1 Version 17 at 0xFC900000. +ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) +ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) +ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) +ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) +IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 +ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +ACPI: BIOS IRQ0 pin2 override ignored. +ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) +ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) +ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) +ACPI: IRQ9 used by override. +ACPI: IRQ14 used by override. +ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs -Processors: 1 -Allocating PCI resources starting at 70000000 (gap: 60000000:a0000000) -Built 1 zonelists. Total pages: 390144 -Kernel command line: root=/dev/hda3 ro +Using ACPI (MADT) for SMP configuration information +Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) +Built 1 zonelists. Total pages: 390129 +Kernel command line: root=/dev/hda3 ro mapped APIC to ffffd000 (fee00000) -mapped IOAPIC to ffffc000 (fc900000) +mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) -Detected 2211.367 MHz processor. +Detected 2211.369 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -Memory: 1550348k/1572864k available (1688k kernel code, 21364k reserved, 653k data, 244k init, 655360k highmem) +Memory: 1550220k/1572800k available (1688k kernel code, 21368k reserved, 653k data, 244k init, 655296k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) @@ -54,7 +80,7 @@ .data : 0xc02a62bf - 0xc03497e4 ( 653 kB) .text : 0xc0100000 - 0xc02a62bf (1688 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. -Calibrating delay using timer specific routine.. 4429.03 BogoMIPS (lpj=8858066) +Calibrating delay using timer specific routine.. 4425.47 BogoMIPS (lpj=8850948) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized @@ -70,50 +96,86 @@ SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20070126 -ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20070126] -ACPI: Unable to load the System Description Tables CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02 -Total of 1 processors activated (4429.03 BogoMIPS). +Total of 1 processors activated (4425.47 BogoMIPS). ENABLING IO-APIC IRQs -..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 -..MP-BIOS bug: 8254 timer not connected to IO-APIC -...trying to set up timer (IRQ0) through the 8259A ... -..... (found pin 0) ...works. +..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 -PCI: Using configuration type 1 +ACPI: bus type pci registered +PCI: Using MMCONFIG +PCI: No mmconfig possible on device 00:18 Setting up standard PCI resources -ACPI: Interpreter disabled. -Linux Plug and Play Support v0.97 (c) Adam Belay -pnp: PnP ACPI: disabled -PnPBIOS: Scanning system for PnP BIOS support... -PnPBIOS: PnP BIOS support was not detected. -PCI: Probing PCI hardware +ACPI: Interpreter enabled +ACPI: (supports S0 S1 S3 S4 S5) +ACPI: Using IOAPIC for interrupt routing +ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 -PCI: Unable to handle 64-bit address space for bridge 0000:00:0b.0 -PCI: Unable to handle 64-bit address space for bridge 0000:00:0c.0 -PCI: Unable to handle 64-bit address space for bridge 0000:00:0d.0 -PCI: Unable to handle 64-bit address space for bridge 0000:00:0e.0 -PCI: Using IRQ router default [10de/005c] at 0000:00:09.0 -PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10 -PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 21 -PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 20 -PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 23 -PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22 -PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 23 -PCI BIOS passed nonexistent PCI bus 1! -PCI: Cannot allocate resource region 5 of device 0000:00:01.1 +ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] +ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] +ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) +ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15) +ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) +ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) +ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) +ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) +ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) +ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) +ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. +ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 +ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. +ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. +ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. +ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. +ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. +ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. +ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. +ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 +ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. +Linux Plug and Play Support v0.97 (c) Adam Belay +pnp: PnP ACPI init +ACPI: bus type pnp registered +pnp: PnP ACPI: found 15 devices +ACPI: ACPI bus type pnp unregistered +PnPBIOS: Disabled by ACPI PNP +PCI: Using ACPI for IRQ routing +PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 +ACPI: RTC can wake from S4 +pnp: 00:01: ioport range 0x4000-0x407f has been reserved +pnp: 00:01: ioport range 0x4080-0x40ff has been reserved +pnp: 00:01: ioport range 0x4400-0x447f has been reserved +pnp: 00:01: ioport range 0x4480-0x44ff has been reserved +pnp: 00:01: ioport range 0x4800-0x487f has been reserved +pnp: 00:01: ioport range 0x4880-0x48ff has been reserved +pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved +pnp: 00:0e: iomem range 0xf0000-0xf3fff could not be reserved +pnp: 00:0e: iomem range 0xf4000-0xf7fff could not be reserved +pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved +pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved +Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:09.0 IO window: disabled. - MEM window: fc000000-fc8fffff - PREFETCH window: 70000000-700fffff + MEM window: d0000000-d1ffffff + PREFETCH window: 68000000-680fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. -Time: tsc clocksource has been installed. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 @@ -142,7 +204,7 @@ checking if image is initramfs... it is Freeing initrd memory: 5286k freed audit: initializing netlink socket (disabled) -audit(1191006556.256:1): initialized +audit(1191006861.244:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) @@ -151,121 +213,149 @@ io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 -PCI: Found disabled HT MSI Mapping on 0000:00:00.0 -PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0b.0. +PCI: Found enabled HT MSI Mapping on 0000:00:00.0 +PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 -PCI: Found disabled HT MSI Mapping on 0000:00:00.0 -PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0c.0. +PCI: Found enabled HT MSI Mapping on 0000:00:00.0 +PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 -PCI: Found disabled HT MSI Mapping on 0000:00:00.0 -PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0d.0. +PCI: Found enabled HT MSI Mapping on 0000:00:00.0 +PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 -PCI: Found disabled HT MSI Mapping on 0000:00:00.0 -PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0e.0. -Boot video device is 0000:01:06.0 +PCI: Found enabled HT MSI Mapping on 0000:00:00.0 +PCI: Linking AER extended capability on 0000:00:0e.0 +Boot video device is 0000:05:06.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] +Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] +Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] +Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] +Allocate Port Service[0000:00:0e.0:pcie03] isapnp: Scanning for PnP cards... +Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A +00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize -PNP: No PS/2 controller found. Probing ports directly. -i8042.c: Can't read CTR while initializing i8042. -i8042: probe of i8042 failed with error -5 +PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 +PNP: PS/2 controller doesn't have AUX irq; using default 12 +serio: i8042 KBD port at 0x60,0x64 irq 1 +serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 244k freed -thermal: Unknown symbol acpi_processor_set_thermal_limit -Clocksource tsc unstable (delta = 504074564 ns) -Time: pit clocksource has been installed. +input: AT Translated Set 2 keyboard as /class/input/input0 +ACPI: Fan [FAN] (on) +ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] +ACPI: Thermal Zone [THRM] (40 C) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb -SCSI subsystem initialized -libata version 2.21 loaded. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver +ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 +ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 -ohci_hcd 0000:00:02.0: irq 21, io mem 0xfc901000 +ohci_hcd 0000:00:02.0: irq 16, io mem 0xd2004000 +SCSI subsystem initialized +libata version 2.21 loaded. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. +ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 +ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 -ehci_hcd 0000:00:02.1: irq 20, io mem 0xfc905000 +ehci_hcd 0000:00:02.1: irq 17, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected +Floppy drive(s): fd0 is 1.44M +FDC 0 is a post-1991 82077 +Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 +ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx +NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 +NFORCE-CK804: chipset revision 242 +NFORCE-CK804: not 100% native mode: will probe irqs later +NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller + ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA + ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA +Probing IDE interface ide0... +hda: ST315323A, ATA DISK drive +usb 1-1: new low speed USB device using ohci_hcd and address 2 +usb 1-1: configuration #1 chosen from 1 choice +usbcore: registered new interface driver hiddev +input: Logitech Logitech USB Keyboard as /class/input/input1 +input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-1 +usbcore: registered new interface driver usbhid +drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver +ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 +Probing IDE interface ide1... sata_nv 0000:00:07.0: version 3.4 +ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 +ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi0 : sata_nv scsi1 : sata_nv -ata1: SATA max UDMA/133 cmd 0xf8856480 ctl 0xf88564a0 bmdma 0x00011030 irq 23 -ata2: SATA max UDMA/133 cmd 0xf8856580 ctl 0xf88565a0 bmdma 0x00011038 irq 23 -Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 -ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx +ata1: SATA max UDMA/133 cmd 0xf8822480 ctl 0xf88224a0 bmdma 0x0001d800 irq 18 +ata2: SATA max UDMA/133 cmd 0xf8822580 ctl 0xf88225a0 bmdma 0x0001d808 irq 18 +hda: max request size: 128KiB +hda: 30008475 sectors (15364 MB) w/512KiB Cache, CHS=29770/16/63, UDMA(66) +hda: cache flushes not supported + hda: hda1 hda2 hda3 ata1: SATA link down (SStatus 0 SControl 300) -usb 1-1: new low speed USB device using ohci_hcd and address 2 ata2: SATA link down (SStatus 0 SControl 300) +ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 +ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi2 : sata_nv scsi3 : sata_nv -ata3: SATA max UDMA/133 cmd 0xf8830480 ctl 0xf88304a0 bmdma 0x00011040 irq 22 -ata4: SATA max UDMA/133 cmd 0xf8830580 ctl 0xf88305a0 bmdma 0x00011048 irq 22 -usb 1-1: configuration #1 chosen from 1 choice -usbcore: registered new interface driver hiddev -input: Logitech Logitech USB Keyboard as /class/input/input0 -input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-1 -usbcore: registered new interface driver usbhid -drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver +ata3: SATA max UDMA/133 cmd 0xf8840480 ctl 0xf88404a0 bmdma 0x0001c400 irq 19 +ata4: SATA max UDMA/133 cmd 0xf8840580 ctl 0xf88405a0 bmdma 0x0001c408 irq 19 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) +ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 +ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA -eth0: forcedeth.c: subsystem: 010f1:2891 bound to 0000:00:0a.0 -NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 -NFORCE-CK804: chipset revision 162 -NFORCE-CK804: not 100% native mode: will probe irqs later -NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller -PCI: Setting latency timer of device 0000:00:06.0 to 64 - ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:pio, hdb:pio - ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:pio, hdd:pio -Probing IDE interface ide0... -hda: ST315323A, ATA DISK drive -ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 -Probing IDE interface ide1... -hda: max request size: 128KiB -hda: 30008475 sectors (15364 MB) w/512KiB Cache, CHS=29770/16/63, UDMA(66) -hda: cache flushes not supported - hda: hda1 hda2 hda3 +eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udev: renamed network interface eth0 to eth1 -i2c-adapter i2c-0: nForce2 SMBus adapter at 0xc80 -i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1400 +input: PC Speaker as /class/input/input2 +parport_pc 00:09: reported by Plug and Play ACPI +parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] +Real Time Clock Driver v1.12ac +i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 +i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 +ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 +ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17 +PCI: Setting latency timer of device 0000:00:04.0 to 64 +intel8x0_measure_ac97_clock: measured 54617 usecs +intel8x0: clocking to 46955 Adding 979956k swap on /dev/hda2. Priority:-1 extents:1 across:979956k EXT3 FS on hda3, internal journal loop: module loaded
Linux version 2.6.22-2-686 (Debian 2.6.22-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 0000000060000000 (usable) 640MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 00000010 Entering add_active_range(0, 0, 393216) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 393216 early_node_map[1] active PFN ranges 0: 0 -> 393216 On node 0 totalpages: 393216 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 1280 pages used for memmap HighMem zone: 162560 pages, LIFO batch:31 DMI not present or invalid. Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: ASUS Product ID: A8NE APIC at: 0xFEE00000 Processor #0 15:15 APIC version 16 I/O APIC #1 Version 17 at 0xFC900000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 70000000 (gap: 60000000:a0000000) Built 1 zonelists. Total pages: 390144 Kernel command line: root=/dev/hda3 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fc900000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2211.367 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1550348k/1572864k available (1688k kernel code, 21364k reserved, 653k data, 244k init, 655360k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc034f000 - 0xc038c000 ( 244 kB) .data : 0xc02a62bf - 0xc03497e4 ( 653 kB) .text : 0xc0100000 - 0xc02a62bf (1688 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4429.03 BogoMIPS (lpj=8858066) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20070126 ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20070126] ACPI: Unable to load the System Description Tables CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02 Total of 1 processors activated (4429.03 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: PnP BIOS support was not detected. PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 PCI: Unable to handle 64-bit address space for bridge 0000:00:0b.0 PCI: Unable to handle 64-bit address space for bridge 0000:00:0c.0 PCI: Unable to handle 64-bit address space for bridge 0000:00:0d.0 PCI: Unable to handle 64-bit address space for bridge 0000:00:0e.0 PCI: Using IRQ router default [10de/005c] at 0000:00:09.0 PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 21 PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 20 PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22 PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 23 PCI BIOS passed nonexistent PCI bus 1! PCI: Cannot allocate resource region 5 of device 0000:00:01.1 NET: Registered protocol family 8 NET: Registered protocol family 20 PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: fc000000-fc8fffff PREFETCH window: 70000000-700fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. Time: tsc clocksource has been installed. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5286k freed audit: initializing netlink socket (disabled) audit(1191006556.256:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found disabled HT MSI Mapping on 0000:00:00.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0b.0. PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found disabled HT MSI Mapping on 0000:00:00.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0c.0. PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found disabled HT MSI Mapping on 0000:00:00.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0d.0. PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found disabled HT MSI Mapping on 0000:00:00.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0e.0. Boot video device is 0000:01:06.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: No PS/2 controller found. Probing ports directly. i8042.c: Can't read CTR while initializing i8042. i8042: probe of i8042 failed with error -5 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 244k freed thermal: Unknown symbol acpi_processor_set_thermal_limit Clocksource tsc unstable (delta = 504074564 ns) Time: pit clocksource has been installed. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb SCSI subsystem initialized libata version 2.21 loaded. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 21, io mem 0xfc901000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 20, io mem 0xfc905000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected sata_nv 0000:00:07.0: version 3.4 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xf8856480 ctl 0xf88564a0 bmdma 0x00011030 irq 23 ata2: SATA max UDMA/133 cmd 0xf8856580 ctl 0xf88565a0 bmdma 0x00011038 irq 23 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ata1: SATA link down (SStatus 0 SControl 300) usb 1-1: new low speed USB device using ohci_hcd and address 2 ata2: SATA link down (SStatus 0 SControl 300) sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xf8830480 ctl 0xf88304a0 bmdma 0x00011040 irq 22 ata4: SATA max UDMA/133 cmd 0xf8830580 ctl 0xf88305a0 bmdma 0x00011048 irq 22 usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech Logitech USB Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 010f1:2891 bound to 0000:00:0a.0 NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 162 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller PCI: Setting latency timer of device 0000:00:06.0 to 64 ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: ST315323A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: 30008475 sectors (15364 MB) w/512KiB Cache, CHS=29770/16/63, UDMA(66) hda: cache flushes not supported hda: hda1 hda2 hda3 Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udev: renamed network interface eth0 to eth1 i2c-adapter i2c-0: nForce2 SMBus adapter at 0xc80 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1400 Adding 979956k swap on /dev/hda2. Priority:-1 extents:1 across:979956k EXT3 FS on hda3, internal journal loop: module loaded device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 10 lo: Disabled Privacy Extensions nforce: no IPv6 routers present
Linux version 2.6.22-2-686 (Debian 2.6.22-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 639MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5650 Entering add_active_range(0, 0, 393200) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 393200 early_node_map[1] active PFN ranges 0: 0 -> 393200 On node 0 totalpages: 393200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 1279 pages used for memmap HighMem zone: 162545 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP 000F76C0, 0014 (r0 Nvidia) ACPI: RSDT 5FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: FACP 5FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 5FFF3180, 6264 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) ACPI: FACS 5FFF0000, 0040 ACPI: SRAT 5FFF9500, 0090 (r1 AMD HAMMER 1 AMD 1) ACPI: MCFG 5FFF9600, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: APIC 5FFF9440, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) Built 1 zonelists. Total pages: 390129 Kernel command line: root=/dev/hda3 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2211.369 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1550220k/1572800k available (1688k kernel code, 21368k reserved, 653k data, 244k init, 655296k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc034f000 - 0xc038c000 ( 244 kB) .data : 0xc02a62bf - 0xc03497e4 ( 653 kB) .text : 0xc0100000 - 0xc02a62bf (1688 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4425.47 BogoMIPS (lpj=8850948) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20070126 CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02 Total of 1 processors activated (4425.47 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on device 00:18 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: RTC can wake from S4 pnp: 00:01: ioport range 0x4000-0x407f has been reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff has been reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:0e: iomem range 0xf0000-0xf3fff could not be reserved pnp: 00:0e: iomem range 0xf4000-0xf7fff could not be reserved pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: d0000000-d1ffffff PREFETCH window: 68000000-680fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5286k freed audit: initializing netlink socket (disabled) audit(1191006861.244:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0e.0 Boot video device is 0000:05:06.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 244k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Fan [FAN] (on) ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI: Thermal Zone [THRM] (40 C) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 16, io mem 0xd2004000 SCSI subsystem initialized libata version 2.21 loaded. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 17, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST315323A, ATA DISK drive usb 1-1: new low speed USB device using ohci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech Logitech USB Keyboard as /class/input/input1 input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... sata_nv 0000:00:07.0: version 3.4 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xf8822480 ctl 0xf88224a0 bmdma 0x0001d800 irq 18 ata2: SATA max UDMA/133 cmd 0xf8822580 ctl 0xf88225a0 bmdma 0x0001d808 irq 18 hda: max request size: 128KiB hda: 30008475 sectors (15364 MB) w/512KiB Cache, CHS=29770/16/63, UDMA(66) hda: cache flushes not supported hda: hda1 hda2 hda3 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xf8840480 ctl 0xf88404a0 bmdma 0x0001c400 irq 19 ata4: SATA max UDMA/133 cmd 0xf8840580 ctl 0xf88405a0 bmdma 0x0001c408 irq 19 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udev: renamed network interface eth0 to eth1 input: PC Speaker as /class/input/input2 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Real Time Clock Driver v1.12ac i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 54617 usecs intel8x0: clocking to 46955 Adding 979956k swap on /dev/hda2. Priority:-1 extents:1 across:979956k EXT3 FS on hda3, internal journal loop: module loaded device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 10 lo: Disabled Privacy Extensions nforce: no IPv6 routers present
-- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios