Morgan Tsai wrote: > Dear Corey, > > I used manually partition, only /dev/sda1 for root '/' and /dev/sda2 > for swap, no lvm. > Thanks for your idea. :)
Was worth a shot. Good luck! -Corey > > > Morgan > > ----- Original Message ----- From: "Corey Osgood" > <[EMAIL PROTECTED]> > To: "Morgan Tsai" <[EMAIL PROTECTED]> > Cc: "ron minnich" <[EMAIL PROTECTED]>; "Uwe Hermann" > <[EMAIL PROTECTED]>; "Russell Whitaker" <[EMAIL PROTECTED]>; > "Dennis Chang /SiS" <[EMAIL PROTECTED]>; "Eric Lin" <[EMAIL PROTECTED]>; > <linuxbios@linuxbios.org> > Sent: Friday, October 12, 2007 4:22 PM > Subject: Re: [LinuxBIOS] [IMPORT] GIGABYTE GA-2761GXDK > > >> Morgan Tsai wrote: >>> Dear ron, >>> >>> I got a problem. When I connect an existing FC6 hdd on GA-2761GXDK, the >>> message is: >>> >>> Jumping to boot code at 0x10dbf4 >>> FILO version 0.5 ([EMAIL PROTECTED]) Mon Oct. 8 16:42:41 CST 2007 >>> Press <Enter> for default menu.lst (hde1:/boot/grub/menu.lst), or >>> <Esc> for >>> prom >>> pt... timed out >>> menu: hde1:/boot/grub/menu.lst >>> hde: LBA 8622MB: ST38410A >>> Mounted ext2fs >>> Attempt to read out of device/partition >>> File not found >>> Press any key to continue. >>> ................. >>> >>> I had installed Fedora 6 with another board, and the original root >>> partition >>> is /dev/sda1 >>> Any idea? Thanks! >> >> Doesn't fedora's installer usually like to make a seperate /boot >> partition? If so, that's where you'll have to point FILO to. I don't >> think FILO can handle lvm either (another default "feature" last time I >> tried fedora), but I could be wrong. >> >> -Corey > > -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
