Quoting Corey Osgood <[EMAIL PROTECTED]>:
> [EMAIL PROTECTED] wrote:
>> Here is /proc/cpuinfo from the original bios:
>>
>> processor : 0
>> vendor_id : GenuineIntel
>> cpu family : 6
>> model : 11
>> model name : Mobile Intel(R) Celeron(TM) CPU 733MHz
>> stepping : 4
>> cpu MHz : 731.076
>> cache size : 256 KB
>> fdiv_bug : no
>> hlt_bug : no
>> f00f_bug : no
>> coma_bug : no
>> fpu : yes
>> fpu_exception : yes
>> cpuid level : 2
>> wp : yes
>> flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
>> cmov pat
>> pse36 mmx fxsr sse
>> bogomips : 1445.88
>>
>> What would my cpu_device_id be then? 0x06B4 right?
>
> Yep, I think so.
>
>> Can this be
>> combined with the model_69x then? They are very close.
>>
>
> Probably. If it works, go with it.
>
>> Or possibly we can condense them into a model_6xxm (that's an m on the
>> end for mobile)??
>>
>
> Sorry, too lazy to restart the reply. That doesn't seem like a great
> idea, seems like it could have bad repercussions with p4s that use
> 0x06xx model numbers, if they aren't compatible. Also the 69x are
> non-mobile cpus.
>
> -Corey
>
Are you sure? Looks like the only CPU that calls the model_69x and
model_6dx is from the socket_mPGA479M. I'm assuming the "M" on the end
is for "Mobile", also considering the processors mentioned are:
From model_6dx_init.c
{ X86_VENDOR_INTEL, 0x06D6 }, /* Pentium M on 90nm with 2MiB of L2 cache */
From model_69x_init.c
{ X86_VENDOR_INTEL, 0x0695 }, /* Pentium M */
It just seems a little silly to setup a whole new directory of exactly
the same code as these. Except mine would say:
model_6bx_init.c
{ X86_VENDOR_INTEL, 0x06B4 }, /* Mobile Celeron FCBGA 479*/
Corey, you should be able to relate with all your i82801xx code
condensing. Good work by the way (if I hadden't mentioned that
already):-)
Thanks - Joe
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
