Gregg C Levine wrote: > Hello! > Actually in answer to your questions concerning such things as a null modem > cable, that one is a yes. The other problem is that this machine a Dell > GX150 is that he's an Intel job that is he's wearing both a native P3 and an > Intel branded chipset, it’s the I810 series. > > Now it's my understanding that the Intel ones are still hands off until the > company decides to play fair with us. That is I believe the datasheets are > available to any developer who's writing ordinary programs, but the > initialization routines for BIOS developers, now that's a different story. > Probably granted only under an NDA. Ron, did Intel ever want to really > cooperate with the group? Or were they always this grouchy regarding the > whole idea? >
Intel i810 is already partially (mostly) supported. It's not pretty and not perfect, but the asus mew-vm is supported. There's no video support atm though, that might present a bit of a challenge. -Corey > Anyway Uwe this machine is my primary Linux development station. I only ran > the commands to see what they would return. Besides, for what I am planning > regarding this list's work it would be probably a Geode based system. Such > as the Advantech based gizmo that started this thread. > > Good suggestions though. > -- > Gregg C Levine [EMAIL PROTECTED] > "The Force will be with you. Always." Obi-Wan Kenobi > > > > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> > [mailto:[EMAIL PROTECTED] On > >> Behalf Of Uwe Hermann >> Sent: Tuesday, October 16, 2007 6:00 PM >> To: Gregg C Levine >> Cc: linuxbios@linuxbios.org >> Subject: Re: [LinuxBIOS] Advantech 582x >> >> On Tue, Oct 16, 2007 at 04:48:35PM -0400, Gregg C Levine wrote: >> >>> Hello! >>> Just for fun I ran that same command on my Dell GX150 that I use for >>> > Linux > >>> work, and this is what he said: >>> [EMAIL PROTECTED]:/# lspci -tvvn >>> -[0000:00]-+-00.0 8086:1130 >>> +-02.0 8086:1132 >>> +-1e.0-[0000:01]----0c.0 10b7:9200 >>> +-1f.0 8086:2440 >>> +-1f.1 8086:244b >>> +-1f.2 8086:2442 >>> +-1f.3 8086:2443 >>> +-1f.4 8086:2444 >>> \-1f.5 8086:2445 >>> [EMAIL PROTECTED]:/# >>> >>> Now would one of you be interested in explaining exactly what he >>> > responded > >>> with? (Be careful of formatting errors.) >>> >> Please re-run as 'lspci -tvnn' (note the small but important >> difference), and also post the 'superiotool -dV' output? >> >> This is a very different board, though, it has nothing to do with the >> AMD Geode GX1. Your's is an Intel-board which just happens to be called >> > GX1. > >> Do you want to run LinuxBIOS on this one? Does flashrom work on the >> board? Do you have a spare ROM chip, a null-modem cable etc. to test >> > patches? > >> Uwe. >> -- >> http://www.hermann-uwe.de | http://www.holsham-traders.de >> http://www.crazy-hacks.org | http://www.unmaintained-free-software.org >> > > > -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios