On Mon, Nov 05, 2007 at 03:45:55PM -0500, Hanoi Santos Hung wrote: > Hi : > I'm working with this hardware configuration : > North : vt8605 > South : vt82C686B > RAM : 128 MB SODIMM > > I begin modifying the code from vt8601 and LinuxBIOS V1.0 version > of vt82c686
Wow, 1.0 is really old. Was there no board in 2.0 that was similar to your board? Perhaps one of the EPIA boards? > and I have my system working until it tries to load the payload > (filo). I think the problem was the memory, but > ram_check(0x00000000, 0xA0000); > ram_check(0x00100000, 0x8000000); > > works perfectly, ram_check() is a _VERY_ simplistic memory test, RAM is not neccessarily working properly just because it does not fail. Please try to use memtest86 as payload before FILO or anything else. > another symptom : when the board make a cold start it > freeze at "Jumping to LinuxBIOS". > > I'll apreciate any help Please send the full serial output you get from the board. //Peter -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios