Hi guys, I finally have spare ROM chips to play with and I am ready to put LinuxBIOS on them - I have problems with compiling the beast, however. I have checkied out the latest revision from SVN and here's what I'm getting when trying to compile:
--------------- CUT -------------------- gcc -m32 -nostdlib -nostartfiles -static -o linuxbios_ram -T /home/luke/src/carpc-project/LinuxBIOSv2/src/config/linuxbios_ram.ld linuxbios_ram.o nm -n linuxbios_ram | sort > linuxbios_ram.map objcopy --gap-fill 0xff -O binary linuxbios_ram linuxbios_ram.bin gcc -O2 -DENCODE -DDECODE -DMAIN -DVERBOSE -DNDEBUG -DBITSIZE=32 -DENDIAN=0 /home/luke/src/carpc-project/LinuxBIOSv2/util/nrv2b/nrv2b.c -o nrv2b ./nrv2b e linuxbios_ram.bin linuxbios_ram.nrv2b input/output = 64748/29627 = 2.185 cp linuxbios_ram.nrv2b linuxbios_ram.rom echo '/*ldoptions*/' > ldscript.ld; cat ldoptions >> ldscript.ld ; for file in /home/luke/src/carpc-project/LinuxBIOSv2/src/arch/i386/init/ldscript_fallback.lb /home/luke/src/carpc-project/LinuxBIOSv2/src//cpu/x86/16bit/entry16.lds /home/luke/src/carpc-project/LinuxBIOSv2/src//cpu/x86/32bit/entry32.lds /home/luke/src/carpc-project/LinuxBIOSv2/src//cpu/x86/16bit/reset16.lds /home/luke/src/carpc-project/LinuxBIOSv2/src//arch/i386/lib/id.lds /home/luke/src/carpc-project/LinuxBIOSv2/src//arch/i386/lib/failover.lds ; do echo /\* $file \*/ >> ldscript.ld; cat $file >> ldscript.ld ; done gcc -m32 -nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o /usr/bin/ld: warning: dot moved backwards before `.reset' /usr/bin/ld: warning: dot moved backwards before `.id' /usr/bin/ld: warning: dot moved backwards before `.id' /usr/bin/ld: warning: dot moved backwards before `.id' /usr/bin/ld: section .id [00000000ffffffd9 -> 00000000ffffffef] overlaps section .rom [00000000ffffb3bf -> 000000010000192f] /usr/bin/ld: linuxbios: section .id lma 0xffffffd9 overlaps previous sections collect2: ld returned 1 exit status make[1]: *** [linuxbios] Error 1 make[1]: Leaving directory `/home/luke/src/carpc-project/LinuxBIOSv2/targets/via/epia-m/epia-m/fallback' make: *** [fallback/linuxbios.rom] Error 1 --------------- CUT -------------------- Here's my Config.lb: --------------- CUT -------------------- # Sample config file for EPIA-M # This will make a target directory of ./epia-m target epia-m mainboard via/epia-m option MAXIMUM_CONSOLE_LOGLEVEL=8 option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 option ROM_SIZE=256*1024 option HAVE_OPTION_TABLE=1 option CONFIG_ROM_PAYLOAD=1 option HAVE_FALLBACK_BOOT=1 ### ### Compute the location and size of where this firmware image ### (linuxBIOS plus bootloader) will live in the boot rom chip. ### option FALLBACK_SIZE=0x18000 ## LinuxBIOS C code runs at this location in RAM option _RAMBASE=0x00004000 ### ### Compute the start location and size size of ### The linuxBIOS bootloader. ### # # EPIA-M # romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0xc000 option ROM_SECTION_OFFSET=0x10000 option ROM_SECTION_SIZE=0x18000 option LINUXBIOS_EXTRA_VERSION=".0-Normal" payload $(HOME)/src/carpc-project/filo-0.5/filo.elf end romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0xc000 option LINUXBIOS_EXTRA_VERSION=".0-Fallback" payload $(HOME)/src/carpc-project/filo-0.5/filo.elf end #buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" buildrom ./linuxbios.rom ROM_SIZE "fallback" --------------- CUT -------------------- I have commented out the normal build because I want to prepend original VGA BIOS from the board to LinuxBIOS and I guess the fallback one is the right one to use (at least according to LinuxBIOS documentation (documentation/HOWTO/EPIA-M-howto). This file also states how to get the VGA bios: dd if=/dev/mem of=/video.bios.bin \ bs=1 count=65536 skip=790528 while Confirmed working SVN revisions at http://www.linuxbios.org/index.php/Confirmed_working_svn_revisions says something different: dd if=/dev/mem of=video.bios.bin.4 bs=65536 count=1 skip=12 (I have checked that generated files differ) Big thanks, -- Coquelicot -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios