Author: hailfinger
Date: 2007-11-14 18:57:04 +0100 (Wed, 14 Nov 2007)
New Revision: 2973
Modified:
trunk/LinuxBIOSv2/src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c
Log:
Gigabyte M57SLI: Fix watchdog clocksource to be external, not internal.
Reason: The existing code does not tell us why it sets the watchdog
clock at all, but since it appears in cache_as_ram_auto.c instead of
the usual place (Config.lb) there has to be some meaning to it.
Simply do what the proprietary bios does: Use the external clock source.
Signed-off-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]>
Acked-by: Ward Vandewege <[EMAIL PROTECTED]>
Modified: trunk/LinuxBIOSv2/src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c
===================================================================
--- trunk/LinuxBIOSv2/src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c
2007-11-14 15:09:30 UTC (rev 2972)
+++ trunk/LinuxBIOSv2/src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c
2007-11-14 17:57:04 UTC (rev 2973)
@@ -273,8 +273,8 @@
}
pnp_enter_ext_func_mode(SERIAL_DEV);
- /* The following line will set CLKIN to 24 MHz */
- pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_CLOCKSEL, 1);
+ /* The following line will set CLKIN to 24 MHz, external */
+ pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_CLOCKSEL, 0x11);
tmp = pnp_read_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP);
/* Is serial flash enabled? Then enable writing to serial flash. */
if (tmp & 0x0e) {
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
