I'm working with a two dual core Opteron (2218HE) motherboard using a
new and currently unsupported chipset from Broadcom. During the early
startup I'm seeing the messages I've included below. I know I have
problems in my Config.lb for the board which is causing the complaint
about static devices at the end but my question is regarding the section
containing the fidvid timeout messages. Can someone help me out by
providing a clue for what I can do to correct the problem?
Thanks,
Steve
LinuxBIOS-2.0.0._xxxx_Fallback OBJ-XXXX-XX Tue Nov 20 14:32:28 PST
2007 starting...
(0,1) link=01
(1,0) link=01
02 nodes initialized.
core0 started: 01
01 02 03SBLink=00
NC node|link=00
SMBus controller enabled
INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} ---
Issuing SOFT_RESET...
(0,1) link=01
(1,0) link=03
02 nodes initialized.
core0 started: 01
*01*00000001
*02*00000001
*03*00000001
SBLink=00
NC node|link=00
SMBus controller enabled
begin msr fid, vid 310a12120a120202
fidvid_bsp_stage1: time out while reading from ap 02
set fid failed for apicid =00
fidvid_bsp_stage2: time out while reading from ap 02
end msr fid, vid 310a120a0a120202
ht reset -
Ram1.00
Ram1.01
Ram2.00
Registered
333Mhz
Interleaved
RAM: 0x00400000 KB
Ram2.01
Registered
333Mhz
Interleaved
RAM: 0x00800000 KB
Ram3
Initializing memory: done
Initializing memory: done
RAM: 0x00900000 KB
Setting variable MTRR 02, base: 0000MB, range: 0800MB, type WB
Setting variable MTRR 03, base: 0800MB, range: 0400MB, type WB
DQS Training:RcvrEn:Pass1: 00 CTLRMaxDelay=78 done
DQS Training:RcvrEn:Pass1: 01 CTLRMaxDelay=12 done
DQS Training:DQSPos: 00 done
DQS Training:DQSPos: 01 done
DQS Training:RcvrEn:Pass2: 00 CTLRMaxDelay=7a done
DQS Training:RcvrEn:Pass2: 01 CTLRMaxDelay=42 done
DQS Training:tsc[00]=000000094c3914a3
DQS Training:tsc[01]=000000095401de5f
DQS Training:tsc[02]=00000009540661c3
DQS Training:tsc[03]=0000000a4dae27f1
DQS Training:tsc[04]=0000000a57232364
mem_trained[00]=01
mem_trained[01]=01
Ram4
v_esp=000cefc8
testx = 5a5a5a5a
Copying data from cache to ram -- switching to use ram as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to ram.
src=fffe8000
dst=00004000
linxbios_ram.nrv2b length = 000088d9
linxbios_ram.bin length = 000178cc
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0._apollo_Fallback Tue Nov 20 14:32:28 PST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] enabled
PCI: 00:19.3 siblings=1
CPU: APIC: 02 enabled
CPU: APIC: 03 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] enabled
PCI: 00:00.0 [1166/0140] enabled
PCI: 00:10.0 [1166/0140] enabled next_unitid: 0015
PCI: 00:00.0 [1166/0031] enabled
PCI: 00:15.0 [1166/0031] enabled next_unitid: 001d
PCI: 00:02.0
PCI: 00:02.1
PCI: 00:02.2
PCI: 00:04.0
HT: Left over static devices. Check your Config.lb
PCI: pci_scan_bus for bus 00
PCI: 00:01.0 [1166/0031] enabled
PCI: 00:02.0 subbordinate bus PCI-X
PCI: 00:02.0 [1166/0406] enabled
PCI: 00:02.1 [1166/0429] enabled
Disabling static device: PCI: 00:02.2
PCI: 00:03.0 subbordinate bus PCI-X
PCI: 00:03.0 [1166/0406] enabled
PCI: 00:03.1 [1166/0429] enabled
PCI: 00:04.0 subbordinate bus PCI Express
PCI: 00:04.0 [1166/0420] enabled
PCI: 00:04.1 [1166/042a] enabled
PCI: 00:05.0 subbordinate bus PCI Express
PCI: 00:05.0 [1166/0422] enabled
PCI: 00:05.1 [1166/042a] enabled
PCI: 00:07.0 [1166/0408] enabled
PCI: 00:07.1 [1166/0215] enabled
PCI: 00:07.2 [1166/040a] enabled
Disabling static device: PCI: 00:07.3
PCI: 00:07.4 [1166/040e] enabled
PCI: 00:07.5 [1166/040e] enabled
PCI: 00:07.6 [1166/040e] enabled
PCI: 00:0f.0 [1002/515e] enabled
PCI: 00:10.0 [1166/0140] enabled
PCI: 00:11.0 subbordinate bus PCI Express
PCI: 00:11.0 [1166/0142] disabled
PCI: 00:12.0 subbordinate bus PCI Express
PCI: 00:12.0 [1166/0144] enabled
PCI: 00:13.0 subbordinate bus PCI Express
PCI: 00:13.0 [1166/0142] disabled
PCI: 00:14.0 subbordinate bus PCI Express
PCI: 00:14.0 [1166/0144] disabled
PCI: 00:01.1
PCI: 00:02.0
PCI: 00:02.1
PCI: 00:04.0
PCI: Left over static devices. Check your Config.lb
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
