Uwe, Ron & List, > Jerome, can you try two things on the board: > - Only use _one_ DIMM (if you used more for the first test), AFAIK > there are some issues with multiple DIMMs, but I'm not sure yet.
That's what I had in mind, I will proceed accordingly and report my findings to the list. > Also check the population rules in the board manual, not all slots > are allowed. No, I believe that might be fine as all the memory sticks are identical and perfectly working with the original bios. Please note that I have 4x512MB sticks on this motherboard, which is therefore fully populated. > - Try a different DIMM (different speed settings, vendor, whatever). Again, I doubt this is the issue, but I will certainly try. > Also, please change all '#if 0' lines in cache_as_ram_auto.c to '#if 1' > in order to enable more debugging output which might be useful, and > repost the updated minicom log then. Very well, I will also include the memory type I am currently using. Thanks, Jerome Ibanes -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios