Here patch to support IRQ routing by LinuxBios.
This is necessary for the right setup on the unsupported Linux's chips.
This functionality is include through macro PIRQ_ROUTE in Config.lb.
Tested on iei/juki-511p(cs5530a) and iei/pcisa-lx(cs5536).
Signed-off-by: Nikolay Petukhov <[EMAIL PROTECTED]>
--
Nikolay
diff -Nru LinuxBIOSv2-2986/src/arch/i386/boot/pirq_routing.c LinuxBIOSv2-2986-pirq/src/arch/i386/boot/pirq_routing.c
--- LinuxBIOSv2-2986/src/arch/i386/boot/pirq_routing.c 2005-01-19 19:06:41.000000000 +0500
+++ LinuxBIOSv2-2986-pirq/src/arch/i386/boot/pirq_routing.c 2007-11-26 09:39:25.000000000 +0500
@@ -1,6 +1,7 @@
#include <console/console.h>
#include <arch/pirq_routing.h>
#include <string.h>
+#include <device/pci.h>
#if (DEBUG==1 && HAVE_PIRQ_TABLE==1)
static void check_pirq_routing_table(struct irq_routing_table *rt)
@@ -94,6 +95,80 @@
memcpy((void *)addr, &intel_irq_routing_table, intel_irq_routing_table.size);
printk_info("done.\n");
verify_copy_pirq_routing_table(addr);
+ pirq_routing_irqs(addr);
return addr + intel_irq_routing_table.size;
}
#endif
+
+#if (PIRQ_ROUTE==1 && HAVE_PIRQ_TABLE==1)
+void pirq_routing_irqs(unsigned long addr)
+{
+ int i, j, k, num_entries;
+ unsigned char irq_slot[4];
+ unsigned char pirq[4] = {0, 0, 0, 0};
+ struct irq_routing_table *pirq_tbl;
+ device_t pdev;
+
+ pirq_tbl = (struct irq_routing_table *)(addr);
+ num_entries = (pirq_tbl->size - 32) / 16;
+
+ /* Set PCI IRQs. */
+ for (i = 0; i < num_entries; i++) {
+
+ printk_debug("PIR Entry %d Dev/Fn: %X Slot: %d\n", i,
+ pirq_tbl->slots[i].devfn >> 3, pirq_tbl->slots[i].slot);
+
+ for (j = 0; j < 4; j++) {
+
+ int link = pirq_tbl->slots[i].irq[j].link;
+ int bitmap = pirq_tbl->slots[i].irq[j].bitmap & pirq_tbl->exclusive_irqs;
+ int irq = 0;
+
+ printk_debug("INT: %c link: %x bitmap: %x ",
+ 'A' + j, link, bitmap);
+
+ if (!bitmap|| !link || link > 4) {
+
+ printk_debug("not routed\n");
+ irq_slot[j] = irq;
+ continue;
+ }
+
+ /* yet not routed */
+ if (!pirq[link - 1]) {
+
+ for (k = 2; k < 15; k++) {
+
+ if (!((bitmap >> k) & 1))
+ continue;
+
+ irq = k;
+
+ /* yet not routed */
+ if (pirq[0] != irq && pirq[1] != irq && pirq[2] != irq && pirq[3] != irq)
+ break;
+ }
+
+ if (irq)
+ pirq[link - 1] = irq;
+ }
+ else
+ irq = pirq[link - 1];
+
+ printk_debug("IRQ: %d\n", irq);
+ irq_slot[j] = irq;
+ }
+
+ /* Bus, device, slots IRQs for {A,B,C,D}. */
+ pci_assign_irqs(pirq_tbl->slots[i].bus,
+ pirq_tbl->slots[i].devfn >> 3, irq_slot);
+ }
+
+ printk_debug("PIRQ1: %d\n", pirq[0]);
+ printk_debug("PIRQ2: %d\n", pirq[1]);
+ printk_debug("PIRQ3: %d\n", pirq[2]);
+ printk_debug("PIRQ4: %d\n", pirq[3]);
+
+ pirq_assign_irqs(pirq);
+}
+#endif
diff -Nru LinuxBIOSv2-2986/src/arch/i386/include/arch/pirq_routing.h LinuxBIOSv2-2986-pirq/src/arch/i386/include/arch/pirq_routing.h
--- LinuxBIOSv2-2986/src/arch/i386/include/arch/pirq_routing.h 2005-07-07 00:17:35.000000000 +0600
+++ LinuxBIOSv2-2986-pirq/src/arch/i386/include/arch/pirq_routing.h 2007-11-26 09:39:25.000000000 +0500
@@ -42,6 +42,12 @@
#if HAVE_PIRQ_TABLE==1
unsigned long copy_pirq_routing_table(unsigned long start);
unsigned long write_pirq_routing_table(unsigned long start);
+#if PIRQ_ROUTE==1
+void pirq_routing_irqs(unsigned long start);
+void pirq_assign_irqs(const unsigned char pIntAtoD[4]);
+#else
+#define pirq_routing_irqs(start) {}
+#endif
#else
#define copy_pirq_routing_table(start) (start)
#define write_pirq_routing_table(start) (start)
diff -Nru LinuxBIOSv2-2986/src/config/Options.lb LinuxBIOSv2-2986-pirq/src/config/Options.lb
--- LinuxBIOSv2-2986/src/config/Options.lb 2007-10-08 03:00:02.000000000 +0600
+++ LinuxBIOSv2-2986-pirq/src/config/Options.lb 2007-11-26 09:39:25.000000000 +0500
@@ -726,6 +726,11 @@
export used
comment "IOAPIC support"
end
+define PIRQ_ROUTE
+ default 0
+ export used
+ comment "Define if we have a PIRQ table and want routing irqs"
+end
###############################################
# IDE specific options
diff -Nru LinuxBIOSv2-2986/src/southbridge/amd/cs5530/Config.lb LinuxBIOSv2-2986-pirq/src/southbridge/amd/cs5530/Config.lb
--- LinuxBIOSv2-2986/src/southbridge/amd/cs5530/Config.lb 2007-10-06 03:00:10.000000000 +0600
+++ LinuxBIOSv2-2986-pirq/src/southbridge/amd/cs5530/Config.lb 2007-11-26 09:39:25.000000000 +0500
@@ -23,3 +23,4 @@
driver cs5530_isa.o
driver cs5530_ide.o
driver cs5530_vga.o
+driver cs5530_pirq.o
diff -Nru LinuxBIOSv2-2986/src/southbridge/amd/cs5530/cs5530_pirq.c LinuxBIOSv2-2986-pirq/src/southbridge/amd/cs5530/cs5530_pirq.c
--- LinuxBIOSv2-2986/src/southbridge/amd/cs5530/cs5530_pirq.c 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-pirq/src/southbridge/amd/cs5530/cs5530_pirq.c 2007-11-26 09:39:25.000000000 +0500
@@ -0,0 +1,39 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+
+#if (PIRQ_ROUTE==1 && HAVE_PIRQ_TABLE==1)
+void pirq_assign_irqs(const unsigned char pIntAtoD[4])
+{
+ device_t pdev;
+
+ pdev = dev_find_device(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, 0);
+
+ if (pdev) {
+
+ pci_write_config8(pdev, 0x5c, (pIntAtoD[1] << 4 | pIntAtoD[0]));
+ pci_write_config8(pdev, 0x5d, (pIntAtoD[3] << 4 | pIntAtoD[2]));
+ }
+}
+#endif
diff -Nru LinuxBIOSv2-2986/src/southbridge/amd/cs5536/Config.lb LinuxBIOSv2-2986-pirq/src/southbridge/amd/cs5536/Config.lb
--- LinuxBIOSv2-2986/src/southbridge/amd/cs5536/Config.lb 2007-05-22 16:12:49.000000000 +0600
+++ LinuxBIOSv2-2986-pirq/src/southbridge/amd/cs5536/Config.lb 2007-11-26 09:39:25.000000000 +0500
@@ -20,3 +20,4 @@
config chip.h
driver cs5536.o
driver cs5536_ide.o
+driver cs5536_pirq.o
diff -Nru LinuxBIOSv2-2986/src/southbridge/amd/cs5536/cs5536_pirq.c LinuxBIOSv2-2986-pirq/src/southbridge/amd/cs5536/cs5536_pirq.c
--- LinuxBIOSv2-2986/src/southbridge/amd/cs5536/cs5536_pirq.c 1970-01-01 05:00:00.000000000 +0500
+++ LinuxBIOSv2-2986-pirq/src/southbridge/amd/cs5536/cs5536_pirq.c 2007-11-26 09:48:19.000000000 +0500
@@ -0,0 +1,37 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Nikolay Petukhov <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+
+#if (PIRQ_ROUTE==1 && HAVE_PIRQ_TABLE==1)
+void pirq_assign_irqs(const unsigned char pIntAtoD[4])
+{
+ device_t pdev;
+
+ pdev = dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, 0);
+
+ if (pdev) {
+ pci_write_config16(pdev, 0x5c, (pIntAtoD[3] << 12 | pIntAtoD[2] << 8 | pIntAtoD[1] << 4 | pIntAtoD[0]));
+ }
+}
+#endif
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/juki-511p/Config.lb LinuxBIOSv2-2986-juki/src/mainboard/iei/juki-511p/Config.lb
--- LinuxBIOSv2-2986/src/mainboard/iei/juki-511p/Config.lb 2007-06-08 02:52:42.000000000 +0600
+++ LinuxBIOSv2-2986-juki/src/mainboard/iei/juki-511p/Config.lb 2007-11-26 09:51:35.000000000 +0500
@@ -156,6 +156,10 @@
device pci 0e.0 on end # ETH0
device pci 13.0 on end # USB
+ device pci 09.0 on end # Slot 1
+ device pci 0a.0 on end # Slot 2
+ device pci 0b.0 on end # Slot 3
+ device pci 0c.0 on end # Slot 4
end
end
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/juki-511p/irq_tables.c LinuxBIOSv2-2986-juki/src/mainboard/iei/juki-511p/irq_tables.c
--- LinuxBIOSv2-2986/src/mainboard/iei/juki-511p/irq_tables.c 2007-06-08 02:52:42.000000000 +0600
+++ LinuxBIOSv2-2986-juki/src/mainboard/iei/juki-511p/irq_tables.c 2007-11-26 09:51:35.000000000 +0500
@@ -19,48 +19,67 @@
*/
#include <arch/pirq_routing.h>
+#include <console/console.h>
+#include <device/pci.h>
-#define IRQ_BITMAP_LINK0 0x0800 /* chipset's INTA# input should be routed to IRQ11 */
-#define IRQ_BITMAP_LINK1 0x0400 /* chipset's INTB# input should be routed to IRQ10 */
-#define IRQ_BITMAP_LINK2 0x0000 /* chipset's INTC# input should be routed to nothing (disabled) */
-#define IRQ_BITMAP_LINK3 0x0000 /* chipset's INTD# input should be routed to nothing (disabled) */
+/* Platform IRQs */
+#define PIRQA 11
+#define PIRQB 9
+#define PIRQC 12
+#define PIRQD 10
+
+/* Link */
+#define LINK_PIRQA 1
+#define LINK_PIRQB 2
+#define LINK_PIRQC 3
+#define LINK_PIRQD 4
+#define LINK_NONE 0
+
+/* Map */
+#define IRQ_BITMAP_LINKA (1 << PIRQA)
+#define IRQ_BITMAP_LINKB (1 << PIRQB)
+#define IRQ_BITMAP_LINKC (1 << PIRQC)
+#define IRQ_BITMAP_LINKD (1 << PIRQD)
+#define IRQ_BITMAP_NOLINK 0x0
+
+#define EXCLUSIVE_PCI_IRQS (IRQ_BITMAP_LINKA | IRQ_BITMAP_LINKB | IRQ_BITMAP_LINKC | IRQ_BITMAP_LINKD)
const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */
- 32+16*2, /* There can be a total of 2 devices on the bus */
+ 32+16*IRQ_SLOT_COUNT, /* There can be a total of IRQ_SLOT_COUNT devices on the bus */
0x00, /* Where the interrupt router lies (bus) */
(0x12<<3)|0x0, /* Where the interrupt router lies (dev) */
- 0xc00, /* IRQs devoted exclusively to PCI usage */
+ EXCLUSIVE_PCI_IRQS, /* IRQs devoted exclusively to PCI usage */
0x1078, /* Vendor */
0x2, /* Device */
0, /* Crap (miniport) */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0x57, /* u8 checksum. This has to be set to some
+ 0x29, /* u8 checksum. This has to be set to some
value that would give 0 after the sum of all
bytes for this structure (including checksum) */
.slots = {
[0] = {
- .slot = 0x0, /* should be 0 when it is no real slot. My device is soldered */
+ .slot = 0x0, /* means also "on board" */
.bus = 0x00,
- .devfn = (0x13<<3)|0x0, /* 0x13 is my USB OHCI */
+ .devfn = (0x13<<3)|0x0, /* 0x13 is USB OHCI */
.irq = {
[0] = { /* <-- 0 means this is INTA# output from the device or slot */
- .link = 0x01, /* 0x01 means its connected to INTA# input at chipset */
- .bitmap = IRQ_BITMAP_LINK0
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
},
[1] = { /* <-- 1 means this is INTB# output from the device or slot */
- .link = 0x02, /* 0x02 means its connected to INTB# input at chipset */
- .bitmap = IRQ_BITMAP_LINK1
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
},
[2] = { /* <-- 2 means this is INTC# output from the device or slot */
- .link = 0x03, /* 0x03 means its connected to INTC# input at chipset */
- .bitmap = IRQ_BITMAP_LINK2
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
},
[3] = { /* <-- 3 means this is INTD# output from the device or slot */
- .link = 0x04, /* 0x04 means its connected to INTD# input at chipset */
- .bitmap = IRQ_BITMAP_LINK3
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
}
}
},
@@ -68,26 +87,135 @@
[1] = {
.slot = 0x0, /* means also "on board" */
.bus = 0x00,
- .devfn = (0x0e<<3)|0x0, /* 0x0e is my Realtek Network device */
+ .devfn = (0x0e<<3)|0x0, /* 0x0e is Realtek Network device */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQB,
+ .bitmap = IRQ_BITMAP_LINKB
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_NONE,
+ .bitmap = IRQ_BITMAP_NOLINK
+ }
+ }
+ },
+
+/*
+ * ################### backplane ###################
+ */
+
+/*
+ * Not exist on IP-6S, but it PCI1 on IP-7S.
+ */
+ [2] = {
+ .slot = 0x1, /* This is real PCI slot. */
+ .bus = 0x00,
+ .devfn = (0x09<<3)|0x0, /* 0x09 is PCI1 */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_PIRQB,
+ .bitmap = IRQ_BITMAP_LINKB
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_PIRQC,
+ .bitmap = IRQ_BITMAP_LINKC
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_PIRQD,
+ .bitmap = IRQ_BITMAP_LINKD
+ }
+ }
+ },
+/*
+ * PCI2 IP-6S
+ */
+ [3] = {
+ .slot = 0x2, /* This is real PCI slot. */
+ .bus = 0x00,
+ .devfn = (0x0a<<3)|0x0, /* 0x0a is PCI2 on IP-6S */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQD,
+ .bitmap = IRQ_BITMAP_LINKD
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_PIRQB,
+ .bitmap = IRQ_BITMAP_LINKB
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_PIRQC,
+ .bitmap = IRQ_BITMAP_LINKC
+ }
+ }
+ },
+/*
+ * PCI3 IP-6S
+ */
+ [4] = {
+ .slot = 0x3, /* This is real PCI slot. */
+ .bus = 0x00,
+ .devfn = (0x0b<<3)|0x0, /* 0x0b is PCI3 on IP-6S */
.irq = {
[0] = { /* <-- 0 means this is INTA# output from the device or slot */
- .link = 0x02, /* 0x02 means its connected to INTB# input at chipset */
- .bitmap = IRQ_BITMAP_LINK1
+ .link = LINK_PIRQC,
+ .bitmap = IRQ_BITMAP_LINKC
},
[1] = { /* <-- 1 means this is INTB# output from the device or slot */
- .link = 0x03, /* 0x03 means its connected to INTC# input at chipset */
- .bitmap = IRQ_BITMAP_LINK2
+ .link = LINK_PIRQD,
+ .bitmap = IRQ_BITMAP_LINKD
},
[2] = { /* <-- 2 means this is INTC# output from the device or slot */
- .link = 0x04, /* 0x04 means its connected to INTD# input at chipset */
- .bitmap = IRQ_BITMAP_LINK3
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
},
[3] = { /* <-- 3 means this is INTD# output from the device or slot */
- .link = 0x01, /* 0x01 means its connected to INTA# input at chipset */
- .bitmap = IRQ_BITMAP_LINK0
+ .link = LINK_PIRQB,
+ .bitmap = IRQ_BITMAP_LINKB
}
}
- }
+ },
+/*
+ * PCI4 IP-6S
+ */
+ [5] = {
+ .slot = 0x4, /* This is real PCI slot. */
+ .bus = 0x00,
+ .devfn = (0x0c<<3)|0x0, /* 0x0c is PCI4 on IP-6S */
+ .irq = {
+ [0] = { /* <-- 0 means this is INTA# output from the device or slot */
+ .link = LINK_PIRQB,
+ .bitmap = IRQ_BITMAP_LINKB
+ },
+ [1] = { /* <-- 1 means this is INTB# output from the device or slot */
+ .link = LINK_PIRQC,
+ .bitmap = IRQ_BITMAP_LINKC
+ },
+ [2] = { /* <-- 2 means this is INTC# output from the device or slot */
+ .link = LINK_PIRQD,
+ .bitmap = IRQ_BITMAP_LINKD
+ },
+ [3] = { /* <-- 3 means this is INTD# output from the device or slot */
+ .link = LINK_PIRQA,
+ .bitmap = IRQ_BITMAP_LINKA
+ }
+ }
+ },
}
};
diff -Nru LinuxBIOSv2-2986/src/mainboard/iei/juki-511p/Options.lb LinuxBIOSv2-2986-juki/src/mainboard/iei/juki-511p/Options.lb
--- LinuxBIOSv2-2986/src/mainboard/iei/juki-511p/Options.lb 2007-10-11 16:25:35.000000000 +0600
+++ LinuxBIOSv2-2986-juki/src/mainboard/iei/juki-511p/Options.lb 2007-11-26 09:51:35.000000000 +0500
@@ -42,7 +42,11 @@
uses TTYS0_BAUD
uses TTYS0_BASE
uses TTYS0_LCS
+uses CONFIG_GX1_VIDEO
+uses CONFIG_GX1_VIDEOMODE
uses CONFIG_VIDEO_MB
+uses CONFIG_SPLASH_GRAPHIC
+uses PIRQ_ROUTE
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE = 256*1024
@@ -71,7 +75,8 @@
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=0
-default IRQ_SLOT_COUNT=2
+default IRQ_SLOT_COUNT=6
+default PIRQ_ROUTE=1
#object irq_tables.o
##
@@ -140,7 +145,10 @@
default CC="$(CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
-default CONFIG_VIDEO_MB = 0
+default CONFIG_GX1_VIDEO = 1
+default CONFIG_GX1_VIDEOMODE = 0
+default CONFIG_VIDEO_MB = 2
+default CONFIG_SPLASH_GRAPHIC = 1
end
diff -Nru LinuxBIOSv2-2986/targets/iei/juki-511p/Config.lb LinuxBIOSv2-2986-juki/targets/iei/juki-511p/Config.lb
--- LinuxBIOSv2-2986/targets/iei/juki-511p/Config.lb 2007-06-08 02:52:42.000000000 +0600
+++ LinuxBIOSv2-2986-juki/targets/iei/juki-511p/Config.lb 2007-11-26 09:51:35.000000000 +0500
@@ -28,6 +28,9 @@
option CONFIG_COMPRESS=0
option CONFIG_PRECOMPRESSED_PAYLOAD=0
+option DEFAULT_CONSOLE_LOGLEVEL=0
+option MAXIMUM_CONSOLE_LOGLEVEL=0
+
romimage "image"
option ROM_IMAGE_SIZE=64*1024
option LINUXBIOS_EXTRA_VERSION="-filo"
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
