Author: rminnich
Date: 2007-11-27 17:47:34 +0100 (Tue, 27 Nov 2007)
New Revision: 527
Modified:
LinuxBIOSv3/arch/x86/geodelx/geodelx.c
Log:
add one debug print, move all smbus_read_byte to spd_read_byte.
Signed-off-by: Ronald G. Minnich <[EMAIL PROTECTED]>
Acked-by: Corey Osgood <[EMAIL PROTECTED]>
Modified: LinuxBIOSv3/arch/x86/geodelx/geodelx.c
===================================================================
--- LinuxBIOSv3/arch/x86/geodelx/geodelx.c 2007-11-27 16:24:57 UTC (rev
526)
+++ LinuxBIOSv3/arch/x86/geodelx/geodelx.c 2007-11-27 16:47:34 UTC (rev
527)
@@ -150,6 +150,7 @@
{
struct msr msr_glcp_sys_pll; /* GeodeLink PLL control MSR */
+ printk(BIOS_DEBUG, "pll_reset: read msr %#x\n", GLCP_SYS_RSTPLL);
msr_glcp_sys_pll = rdmsr(GLCP_SYS_RSTPLL);
printk(BIOS_DEBUG, "_MSR GLCP_SYS_RSTPLL (%08x) value is: %08x:%08x\n",
@@ -346,20 +347,20 @@
* Note: We only support a module width of 64.
*/
dimms = 0;
- spdbyte0 = smbus_read_byte(dimm0, SPD_PRIMARY_SDRAM_WIDTH);
+ spdbyte0 = spd_read_byte(dimm0, SPD_PRIMARY_SDRAM_WIDTH);
if (spdbyte0 != 0xFF) {
dimms++;
spdbyte0 = (u8)64 / spdbyte0 *
- (u8)(smbus_read_byte(dimm0, SPD_NUM_DIMM_BANKS));
+ (u8)(spd_read_byte(dimm0, SPD_NUM_DIMM_BANKS));
} else {
spdbyte0 = 0;
}
- spdbyte1 = smbus_read_byte(dimm1, SPD_PRIMARY_SDRAM_WIDTH);
+ spdbyte1 = spd_read_byte(dimm1, SPD_PRIMARY_SDRAM_WIDTH);
if (spdbyte1 != 0xFF) {
dimms++;
spdbyte1 = (u8)64 / spdbyte1 *
- (u8)(smbus_read_byte(dimm1, SPD_NUM_DIMM_BANKS));
+ (u8)(spd_read_byte(dimm1, SPD_NUM_DIMM_BANKS));
} else {
spdbyte1 = 0;
}
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
