See patch.
At the very least the IDE legacy port access must be enabled to be
able to use FILO. The rest is optional, but I see no reason to not
enable it per default.
Uwe.
--
http://www.hermann-uwe.de | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
Enable IDE legacy port access and UDMA/33 for all 440BX based boards
per default, for now. If there are problems with UDMA on some of
them we might selectively disable UDMA there.
Signed-off-by: Uwe Hermann <[EMAIL PROTECTED]>
Index: src/mainboard/a-trend/atc-6220/Config.lb
===================================================================
--- src/mainboard/a-trend/atc-6220/Config.lb (Revision 2994)
+++ src/mainboard/a-trend/atc-6220/Config.lb (Arbeitskopie)
@@ -130,6 +130,11 @@
device pci 7.3 on end # ACPI
register "ide0_enable" = "1"
register "ide1_enable" = "1"
+ register "ide_legacy_enable" = "1"
+ register "ide0_drive0_udma33_enable" = "1"
+ register "ide0_drive1_udma33_enable" = "1"
+ register "ide1_drive0_udma33_enable" = "1"
+ register "ide1_drive1_udma33_enable" = "1"
end
end
end
Index: src/mainboard/gigabyte/ga-6bxc/Config.lb
===================================================================
--- src/mainboard/gigabyte/ga-6bxc/Config.lb (Revision 2994)
+++ src/mainboard/gigabyte/ga-6bxc/Config.lb (Arbeitskopie)
@@ -128,6 +128,11 @@
device pci 7.3 on end # ACPI
register "ide0_enable" = "1"
register "ide1_enable" = "1"
+ register "ide_legacy_enable" = "1"
+ register "ide0_drive0_udma33_enable" = "1"
+ register "ide0_drive1_udma33_enable" = "1"
+ register "ide1_drive0_udma33_enable" = "1"
+ register "ide1_drive1_udma33_enable" = "1"
end
end
end
Index: src/mainboard/biostar/m6tba/Config.lb
===================================================================
--- src/mainboard/biostar/m6tba/Config.lb (Revision 2994)
+++ src/mainboard/biostar/m6tba/Config.lb (Arbeitskopie)
@@ -124,6 +124,11 @@
device pci 7.3 on end # ACPI
register "ide0_enable" = "1"
register "ide1_enable" = "1"
+ register "ide_legacy_enable" = "1"
+ register "ide0_drive0_udma33_enable" = "1"
+ register "ide0_drive1_udma33_enable" = "1"
+ register "ide1_drive0_udma33_enable" = "1"
+ register "ide1_drive1_udma33_enable" = "1"
end
end
end
Index: src/mainboard/azza/pt-6ibd/Config.lb
===================================================================
--- src/mainboard/azza/pt-6ibd/Config.lb (Revision 2994)
+++ src/mainboard/azza/pt-6ibd/Config.lb (Arbeitskopie)
@@ -130,6 +130,11 @@
device pci 7.3 on end # ACPI
register "ide0_enable" = "1"
register "ide1_enable" = "1"
+ register "ide_legacy_enable" = "1"
+ register "ide0_drive0_udma33_enable" = "1"
+ register "ide0_drive1_udma33_enable" = "1"
+ register "ide1_drive0_udma33_enable" = "1"
+ register "ide1_drive1_udma33_enable" = "1"
end
end
end
Index: src/mainboard/tyan/s1846/Config.lb
===================================================================
--- src/mainboard/tyan/s1846/Config.lb (Revision 2994)
+++ src/mainboard/tyan/s1846/Config.lb (Arbeitskopie)
@@ -126,6 +126,11 @@
device pci 7.3 on end # ACPI
register "ide0_enable" = "1"
register "ide1_enable" = "1"
+ register "ide_legacy_enable" = "1"
+ register "ide0_drive0_udma33_enable" = "1"
+ register "ide0_drive1_udma33_enable" = "1"
+ register "ide1_drive0_udma33_enable" = "1"
+ register "ide1_drive1_udma33_enable" = "1"
end
end
end
Index: src/mainboard/compaq/deskpro_en_sff_p600/Config.lb
===================================================================
--- src/mainboard/compaq/deskpro_en_sff_p600/Config.lb (Revision 2994)
+++ src/mainboard/compaq/deskpro_en_sff_p600/Config.lb (Arbeitskopie)
@@ -134,6 +134,11 @@
device pci 14.3 on end # ACPI
register "ide0_enable" = "1"
register "ide1_enable" = "1"
+ register "ide_legacy_enable" = "1"
+ register "ide0_drive0_udma33_enable" = "1"
+ register "ide0_drive1_udma33_enable" = "1"
+ register "ide1_drive0_udma33_enable" = "1"
+ register "ide1_drive1_udma33_enable" = "1"
end
end
end
Index: src/mainboard/asus/p2b/Config.lb
===================================================================
--- src/mainboard/asus/p2b/Config.lb (Revision 2994)
+++ src/mainboard/asus/p2b/Config.lb (Arbeitskopie)
@@ -130,6 +130,11 @@
device pci 4.3 on end # ACPI
register "ide0_enable" = "1"
register "ide1_enable" = "1"
+ register "ide_legacy_enable" = "1"
+ register "ide0_drive0_udma33_enable" = "1"
+ register "ide0_drive1_udma33_enable" = "1"
+ register "ide1_drive0_udma33_enable" = "1"
+ register "ide1_drive1_udma33_enable" = "1"
end
end
end
Index: src/mainboard/asus/p2b-f/Config.lb
===================================================================
--- src/mainboard/asus/p2b-f/Config.lb (Revision 2994)
+++ src/mainboard/asus/p2b-f/Config.lb (Arbeitskopie)
@@ -130,6 +130,11 @@
device pci 4.3 on end # ACPI
register "ide0_enable" = "1"
register "ide1_enable" = "1"
+ register "ide_legacy_enable" = "1"
+ register "ide0_drive0_udma33_enable" = "1"
+ register "ide0_drive1_udma33_enable" = "1"
+ register "ide1_drive0_udma33_enable" = "1"
+ register "ide1_drive1_udma33_enable" = "1"
end
end
end
Index: src/mainboard/asus/p3b-f/Config.lb
===================================================================
--- src/mainboard/asus/p3b-f/Config.lb (Revision 2994)
+++ src/mainboard/asus/p3b-f/Config.lb (Arbeitskopie)
@@ -131,6 +131,11 @@
device pci 4.3 on end # ACPI
register "ide0_enable" = "1"
register "ide1_enable" = "1"
+ register "ide_legacy_enable" = "1"
+ register "ide0_drive0_udma33_enable" = "1"
+ register "ide0_drive1_udma33_enable" = "1"
+ register "ide1_drive0_udma33_enable" = "1"
+ register "ide1_drive1_udma33_enable" = "1"
end
end
end
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
