On Dec 9, 2007 9:42 PM, Uwe Hermann <[EMAIL PROTECTED]> wrote: > On Fri, Dec 07, 2007 at 01:39:43PM +0300, Sergei Antonov wrote: > > I'd like to try LinuxBIOS on a 440BX-based Abit BE6-II V2.0. > > After talking on IRC, I'm sending the output of 'lspci -tvnn' and > > 'superiotool -dV' and a generated irq_tabl.c. > > Thanks, here's a patch for your board you can test. I guess most of the > hardware should work with this code, but some smaller issues might need > to be fixed after it has been tested on real hardware.
After some experiments it works. I've found 2 issues. 1. The keyboard doesn't work. Here is a piece of log from the serial port: ===================================== PNP: 03f0.5 init Keyboard init... Keyboard input buffer would not empty ===================================== 2. I had to change filo-0.5\drivers\ide.c function 'find_ide_controller'. For some reason it first looks for IDE controller with class 0x0180 and only if nothing was found looks for class 0x0101. I think it is wrong, but where can I report about that? It worked right for me after this change: -dev = pci_find_device(-1, -1, 0x0180, -1, pci_index); // S-ATA first. +dev = 0; -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios