ron minnich wrote: > v3 loads and runs on an alix1c. > > So far, the only payload that works is a RET. Even a simple OUTB > followed by a RET fails. > > Any ideas on this? I'm flummoxed. Could it be the stack location? > Stack is at 0x8fxxx. > > Also, I have to run at < 1 MB, the memory above 1 MB reads back as all > ffffffff. > > that's all for today. First payload is a good day. fixing disable_car > is even better :-) > we're getting there. > > ron >
This is good news. Is it an _asm outb? The stack was working up to that point so I would assume it is good. Seems like a different problem. In your payload can you do a push/pop test? As for 1MB and above, it sounds like GLIUInit() isn't running correctly. Can you dump RCONF and GLIU MSRs? Something like v2 print_conf() in the norwich\mainboard.c. Marc -- Marc Jones Senior Firmware Engineer (970) 226-9684 Office mailto:[EMAIL PROTECTED] http://www.amd.com/embeddedprocessors -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
