Btw, the block lock bits are all set, so even if you manage to convince
the SPI translation to map more than 512 KByte and even if you use
enable LPC-to-SPI writes, you will still flash nothing. Try this for
better lock bit printing:
Enable LPC write cycle to SPI write cycle translation for IT8716F.
Print detailed status register information for SST25VF series flash.
Signed-off-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]>
Index: flashrom-ron/spi.c
===================================================================
--- flashrom-ron/spi.c (Revision 3036)
+++ flashrom-ron/spi.c (Arbeitskopie)
@@ -136,6 +136,11 @@
0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
printf("LPC write to serial flash %sabled\n",
(tmp & 1 << 4) ? "en" : "dis");
+ if (!(tmp & 1 << 4)) {
+ printf("Force enabling LPC write to serial flash\n");
+ tmp |= 1 << 4;
+ regwrite(port, 0x24, tmp);
+ }
printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
/* LDN 0x7, reg 0x64/0x65 */
regwrite(port, 0x07, 0x7);
@@ -323,7 +328,8 @@
switch (flash->manufacture_id) {
case ST_ID:
case MX_ID:
- if ((flash->model_id & 0xff00) == 0x2000)
+ if (((flash->model_id & 0xff00) == 0x2000) ||
+ ((flash->model_id & 0xff00) == 0x2500))
generic_spi_prettyprint_status_register_st_m25p(status);
break;
}
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
