On Thu, Jan 10, 2008 at 12:31:31AM +0100, Harald Gutmann wrote: > > The switch mod can be simplified to use existing pads and no pins > > have to be lifted from the flash chips anymore. > > > > 1. Remove R509. > > 2. Populate R89 and R130 with 10k or 100k pull-up 0402 resistors. > > 3. Solder the switch common to Q4-3 and switch between Q4-1 and Q5-1. > > Confirmed. But not with SMD Resistors.
Great, thanks for the confirmation! > First I removed the R509. > As there are connections from R89 Left to U5 VCC; from R89 Right to > U9 CS#; from R130 Left to U5 CS# and from R130 Right to U9 VCC I > soldered normal 100k resistors between U5 VCC and U9 CS# and > between U5 CS# and U9 VCC. > > Here are two photos of my new mod: > http://img141.imageshack.us/img141/8866/dscf1791ob2.jpg > http://img104.imageshack.us/img104/2579/dscf1792nn2.jpg Looks good! > I know, that these cables to the sockel are not really fine, but i > had no other solution for mounting the sockel on the mainboard and > it works fine! As long as it works, it is good enough. :) //Peter -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
