Hi.
I just recently went thru the HOWTO for the Matsonic 7308E motherboard I
have.
I configured the kernel ok (except I couldn't get the built in network
adapter to work,
using the 2.4.0 kernel). I used the new python script and it built all
the files with no
problems. I swapped out the bios and put the DoC in, ran the burnit
script (or whatever
it was called). It went thru, said several times that the DOC was
already configured, erased
and wrote all files successfully to it (or at least I believe).
Everything seemed to be working I
thought.
I powered down, unplugged cord for 30 secs just to be sure, and powered
up... it turned on but
nothing came to the screen. I plugged in my POST card and nothing came
on the hex display.
I did notice it was showing a quick reset every few seconds, but nothing
on the display.
Any suggestions on what I could be doing wrong?
Thanks
-Nate
--
Nate Rowe ([EMAIL PROTECTED])
Homepage: http://www.plu.edu/~rowenc
PGP public key: www.plu.edu/~rowenc/pgp.txt
E73D 23EC A859 A3F5 BAD0 6583 C7E2 EBD3 3975 8367
