I know a couple of people are interested and or working in this part so
I'm asking my question here.
Is there anything special that you are doing to reset the 5530 at boot
time. I have custom hardware and it looks like there is a problem in it
where the 5530 can stay powered even though we're powered down. (we're
drawing power off of the USB port and there is about 60 caps on the
board)
So here is my situation. If I cold boot, everything works right, my
pseudo-linuxbios does it's thing and runs it all. If I hit reset then
we get up to when I touch memory in the first meg and everything
stalls. If I pull the plug and plug it back in I get the same thing.
If I pull the plug and leave it down for 15 minutes and plug it back in
then it works again.
Further, if I pull the plug, throw an NSC BIOS in, let it run for a few
seconds, pull the plug and put my pseudo-linuxbios back in then it
works. So there is something that isn't being reset correctly, I
suspect it is on the 5530. Is anyone coding for this part and doing
anything special to reset it?
thanks,
Ian
