Doh. Sorry about that. here is the information that you requested...
Dmesg from Insmods :
M-Systems DiskOnChip driver. (C) 1999 Machine Vision Holdings, Inc.
DiskOnChip Millennium found at address 0xFFFC8000
Flash chip found: Manufacturer ID: 98, Chip ID: E6 (Toshiba TC58V64AFT/DC)
1 flash chips found. Total DiskOnChip size: 8 Mbytes
mtd: Giving out device 0 to DiskOnChip Millennium
Ignoring DiskOnChip Millennium at 0xFFFCA000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFCC000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFCE000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFD0000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFD2000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFD4000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFD6000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFD8000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFDA000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFDC000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFDE000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFE0000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFE2000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFE4000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFE6000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFE8000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFEA000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFEC000 - already configured
Ignoring DiskOnChip Millennium at 0xFFFEE000 - already configured
Erasing /dev/mtd0 :
MTD_open
MTD_ioctl
MTD_ioctl
_DoC_WaitReady called for out-of-line wait
..(repeat above 2 lines - 127 more times.)
MTD_close
dd conv=notrunc if=docipl of=/dev/mtd0 :
MTD_open
MTD_write
_DoC_WaitReady called for out-of-line wait
MTD_close
dd conv=notrunc if=docipl of=/dev/mtd0 seek=1:
MTD_open
MTD_write
_DoC_WaitReady called for out-of-line wait
MTD_close
dd conv=notrunc if=linuxbios.block of=/dev/mtd0 seek=2:
MTD_open
MTD_write
_DoC_WaitReady called for out-of-line wait
MTD_write
..(repeat above 2 lines - 125 more times)
MTD_close
dd conv=notrunc if=vmlinux.bin.gz.block of=/dev/mtd0 seek=128:
(Log full/rolled over)
MTD_write
_DoC_WaitReady called for out-of-line wait
...(repeated through entire log until last line)
MTD_close
Thanks again...
> -----Original Message-----
> From: Ollie Lho [SMTP:[EMAIL PROTECTED]]
> Sent: Friday, March 09, 2001 11:17 PM
> To: Benson, Chris M
> Cc: 'Ronald G Minnich'; [EMAIL PROTECTED]
> Subject: Re: Matsonic MS7308E Problems
>
> "Benson, Chris M" wrote:
> >
> > I did use Flash_on before insmod-ing in the burn_mtd script. I did not
> > execute flash_on before just loading the DOC modules to validate the DOC
> was
> > burnt.
> >
> > I am including the dmesg of the system when loading from HD with the
> kernel
> > created for burn in.
> >
>
> No, I don't what the dmesg when your system boots. I need the demsg when
> you
> run insmod doc* and butm_mtd.
>
> Ollie
