Have just gone through this loop this week. I am also in the uk I sourced a
pcchips 810LMR ( I wanted AMD and it has a sis730 and this board has already
been done ) from www.staktrading.co.uk �57 Ex VAT. I also sourced the DoC
part from the US with a shipping charge of $30 and the part was $30 but I
did order 5 http://www.tri-m.com/pricing/msystems.pdf. I could source the
DoC 2000 from the UK but I lost patients looking for the Milenium part. Have
yet to start work am now waiting for the parts.
Hope this is of some help
Cheers
Nick
Green Signal Software Ltd
UK
----- Original Message -----
From: "Jeremy Jackson" <[EMAIL PROTECTED]>
To: "Russell Gower" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, May 23, 2001 8:58 PM
Subject: Re: Asus M/Board
> Russell Gower wrote:
>
> > I have just placed an order for an asus sis630e based board. just about
the
> > only sis630 board avaliable in the uk. I have also ordered a 512k flash
chip
> > to replace the standard 256k part.If the a18 address line is not
connected
> > on this board where would be a suitable place to connect to, PCI slot!,
cpu
> > or the SiS630e chip (which pin!). Also assuming all goes right with the
> > hardware side of things what needs to be done in software to build for
this
> > enviroment. I have to use normal flash 1 because I could only source a
board
> > with a plcc socket 2 I was unable to find supplier in the uk for the DoC
> > part.
> >
> > Russell.
>
> If this were a board (or is similar to) with a PIIX southbridge, then A18
> would come from ISA.
>
>
