Ollie Lho writes:
> Nikolai Vladychevski wrote:
>>
>> Hi,
>>
>> I got a very bad problem and I can't find where it is (besides other stuff
>> that is pending)...... :
>>
>> I can use the modem when booting with original bios but when I use the
>> motherboard with DoC the modem is not recognized. And a strange thing, the
>> only parameter not recognized by the modem drivers is IRQ... Ports are
>> detected ok.
>
> Where did you get the driver for software modem ?? Is it Open Source ??
>
> Ollie
no, these drivers was sent to me from PCTEL , claimed to be stable (and they
are, I'm using them every day), for the intel i810 chip and audiorouting
with Sis 540 chip. Both devices are on my motherboard (ECS K7SEM) as they
also are on M810LMR. It is not driver issue, it is not motherboard issue, it
is...... I dont know what it is, but with M810LMR I has the same problem, if
you make it on M810LMR it will also work on K7SEM. And with M756LMR i had
similar problem (though it uses Cmedia chip), but not losing IRQ, the modem
was not adquiring IRQ from linuxbios until I found a corresponding working
irq_tables.c . Now I tryed thousand of tables, but no luck...
BTW, the ptserial.c that comes with PCTEL's driver is a modified serial.c
from kernel tree, that's why I can modify and debug the driver's code. PCTEL
has separated his propietary code into pctel.o object that is loaded as
module and used by ptserial.c to init the modem, code/decode and etc...
Nikolai
