* Jeremy Jackson <[EMAIL PROTECTED]> [020328 18:19]: > That's the plan. First comes the MTD support, so I can > get my code into it.
If using LinuxBIOS with etherboot is an option for you, you can put the code into a simple standard flash device (1 or 2 MBit) In this case flashing on a 430*X chipset works nicely using /dev/bios. See http://www.freiburg.linux.de/openbios/status/devbios.html If there's need for an FAQ/Howto on flashing LinuxBIOS on standard flash parts using /dev/bios, drop me a note. I can mix something up. Best regards, Stefan Reinauer -- Ok hex 4666 dup negate do i 4000 dup 2* negate do " *" 0 dup 2dup 1e 0 do 2swap * e >>a 2* 5 pick + -rot - j + dup dup * e >>a rot dup dup * e >>a rot swap 2dup + 10000 > if 3drop 3drop " " 0 dup 2dup leave then loop 2drop 2drop type 268 +loop cr drop 5de +loop
