Ronald G Minnich wrote: > Please send me the irq table. I need a new mainboard directory I think. > > ron
IRQ table for MS7308ET board. However, I noticed that only PCI slot #1 and #2 works. I do get an IRQ in slot #3 but the board is unable to communicate with the network. -mikael
/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ #include <arch/pirq_routing.h> const struct irq_routing_table intel_irq_routing_table = { PIRQ_SIGNATURE, /* u32 signature */ PIRQ_VERSION, /* u16 version */ 32+16*5, /* there can be total 5 devices on the bus */ 0, /* Where the interrupt router lies (bus) */ 0x8, /* Where the interrupt router lies (dev) */ 0, /* IRQs devoted exclusively to PCI usage */ 0x1039, /* Vendor */ 0x8, /* Device */ 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ 0xd7, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { {0,0x8, {{0x41, 0xdeb8}, {0x42, 0xdeb8}, {0x43, 0xdeb8}, {0x44, 0xdeb8}}, 0, 0}, {0,0x10, {{0x41, 0xdeb8}, {0x42, 0xdeb8}, {0x43, 0xdeb8}, {0x44, 0xdeb8}}, 0, 0}, {0,0x48, {{0x41, 0xceb8}, {0x42, 0xceb8}, {0x43, 0xceb8}, {0x44, 0xceb8}}, 0x1, 0}, {0,0x58, {{0x44, 0xceb8}, {0x41, 0xceb8}, {0x42, 0xceb8}, {0x43, 0xceb8}}, 0x2, 0}, {0,0x68, {{0x43, 0xceb8}, {0x44, 0xceb8}, {0x41, 0xceb8}, {0x42, 0xceb8}}, 0x3, 0}, } };
