Next LUG meet: 9 Nov 2003 around 4 pm - VJTI -------------------------------------------- > On Sun, Nov 09, 2003 at 08:54:58PM -0000, abhishek patel wrote: > > > I have RED HAT 9 kernel ver 2.4 running on my P4. The problem is my > > R= ealtek LAN card RTL8139C isn't auto detected by linux and > if try to > > add it = then if shows "Device not present delaying > initialization" at > > boo= t up. There is a problem definately with the driver as the same > > card works = well for Windows network.
There are other settings you need to play around also..those are 1. PnP OS = yes/NO 2. Reset Configuration data = ENABLED/disabled 3. resources controlled by = auto/MANUAL try the CAPSed settings first and then see if the card is being detected. otherwise try combinations from above and each time check if the card is being detected. And by chance, do you have additional pci card, or for that matter another realtek pci card, in the same machine? Also the realtek website provides a diagnostic utility for the card. It is supposed to be run from safe mode command prompt (yeah, M$). If the utility could find and diagnose the card well, the card should be detected in Linux, or try noting down the configuration info (irq/io) given by this util and pass them to kernel directly. also make sure that you are using "8139too" module Thanks and Regards, Kiran Ghag Web Page: http://kiran7.freeservers.com _____ Real Time, adj.: Here and now, as opposed to fake time, which only occurs there and then. -- http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
