You can read the Ethernet HOWTO which tells you which card uses what drivers.. Just wanted to note that I sometimes get this problem when I disconnect my LAN cable from the ethernet card, As soon as I put the cable back on it works fine. Check this link out, it explains some more...
http://www.linuxmanagers.org/pipermail/linuxmanagers/2002-July/000750.html Remember Google is your friend... Regards, Keith > On Wed, 4 Feb 2004, Dilip M wrote: > > But i'm using D-Link's DFE-538TX,which redhat " > > > > But by default,when i do 'kudzu' this n/w card gets detected as "eth0: > > RealTek RTL8139 Fast Ethernet" > > RTL8139 is the chip that is used by DLink cards. Most likely you have a > problem with your card. Try getting another one. > > Philip > > -- > Where humor is concerned there are no standards -- no one can say what > is good or bad, although you can be sure that everyone will. > -- John Kenneth Galbraith -- âI asked for strength and God gave me difficulties to make me strong. I asked for Wisdom... and God gave me problems to solve. I received nothing I wanted... But I received everything I needed." -- http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
