--- Kenneth Gonsalves <[EMAIL PROTECTED]> wrote:
> On Saturday 07 Jan 2006 2:21 pm, Abhishek Daga wrote:
> > MTNL Triband (no static IP assigned to me.). Using Dlink DSL 502
> > router. LAN IP being 192.168.1.1. WAN IP is what the outsider
> > would use to get in.
> > Connected to Netgear Router. (WAN IP = 192.168.1.2, LAN IP =
> > 192.168.0.1). Machines are connected to this netgear router as
> > 192.168.0.X)
>
> you cant access a 192.168.x.x address over the internet - you need
> the dynamic ip
Yes, I know that, but perhaps you misunderstood. Or perhaps i left out an
important bit of information.
Here is how the earlier setup worked (with tata indicom). Everything remained
the
same except the DSL router provided by the ISP.
By enabling bridging mode all requests in the dsl router were routed to my
internal router. (netgear wireless ).
Because of bridging, I put the static public IP that I was assigned by TATA in
my
netgear router as the Internet/WAN IP.
The internal router has port forwarding options where depending on the request
it
is routed to the appropriate 192.168.0.xx machine.
Ofcourse now with MTNL i have to use 192.168.1.2 as my WAN IP because
192.168.1.1
is the gateway (which is the lan IP of the dsl router) and it also has a dynamic
public IP.
How do I bridge over from the mtnl router to the netgear one?
There has to be a way of forwarding the requests to the right machine via the
two
routers?
-thanks
abhishek
__________________________________________
Yahoo! DSL Something to write home about.
Just $16.99/mo. or less.
dsl.yahoo.com
--
http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
