On Sat, Oct 9, 2010 at 1:11 PM, Arun Khan <[email protected]> wrote:
> On Fri, Oct 8, 2010 at 11:52 AM, Dattatray Kamble <[email protected]>
> wrote:
>
> .... major snip .....
> > Hi,
> >
> > I want to configure ftp to different public ip other than squid's
> > public ip.
>
> As others have suggested you need to "port forward" for the service.
> Please read up on port forwarding. All such settings should be in
> your ISP's modem/router - please read up the documentation for your
> ISP's modem/router. On my MTNL modem/router, FTP port forwarding rule
> comes as a template in which I just need to provide the IP number of
> my LAN machine. There must be something similar to it in your
> modem/router. Alternately, most modem/routers provide a "single" DMZ
> host. You can put your FTP server as this DMZ host.
>
> -- Arun Khan
> --
> http://mm.glug-bom.org/mailman/listinfo/linuxers
>
Hi,
I have few public IP's ..I don't have modem...My proxy configured as
transparent with two ethernet cards.
If i apply DNAT rule then i can access the vsftpd system locally with
public ip.but i can't access the system on lan..
The rule applied as follows --
#iptables -t nat -A PREROUTING -d 118.x.x.x -j DNAT --to 192.y.y.y
this 118.x.x.x is no where assigned in the network so where should i apply
port forwarding if no ethernet card available for that ip.
i am struggling on this issue since 5 days.
thanks for any help.
--
http://mm.glug-bom.org/mailman/listinfo/linuxers
