The goal of this series is to convert a bulk of PowerMac i2c drivers to the new "proper" i2c driver registration model. This series is not complete in that there are still a few drivers to do but it goes through the bulk of thermal control and some of the nastiest.
The biggest change is that windfarm is ported to generally use the new model, and I've written a new set of windfarm modules to take over from the old therm_pm72 (which was mostly unfixable) on the PowerMac G5 AGP and Xserve G5 machines. This had a bit of testing on a couple of PowerMac G5 AGP variants but none at all on Xserve G5 since the one I have is unfortunately dead. If you want to help me test this, don't forget to disable therm_pm72, and instead load windfarm_pm72 or windfarm_rm31 depending on your machine (you can load or build-in the whole lot as well). As usual windfarm don't properly auto-load yet, I still need to fix that. So please test ! Especially if you have an XServe G5 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
