On Jul 10, 2007, at 8:21 AM, Segher Boessenkool wrote: >>> +Sense and level information follows the Linux convention >>> +(specified in include/linux/interrupt.h) and should be encoded >>> +as follows: >>> + >>> + 2 = high to low edge sensitive type enabled >>> + 8 = active low level sensitive type enabled > >> ... but it is probably worthwhile commentting that sense types 1 & 4 >> are not supported; just to fill in the obvious gaps. :-) > > Same for sense types 0, 3, 5, 6, ... > > Just name the sense types 0 and 1, similar to what all other > OF interrupt controller bindings do.
I'm not really keen on changing the values at this point. I think we are stuck with them. - k _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev