On Thu, Jul 12, 2007 at 10:40:47AM +0200, Geert Uytterhoeven wrote: > Hi, > > As of 8d28c70b27cb70cf01d21aab8e51a6dc43c10d70, Geoff's git tree[*] has > improved support for video mode autodetection on both HDMI and DVI-D(+HDCP) > monitors. By default the kernel will select the `best' videomode for your > monitor, now also including VESA modes (e.g. 1920x1200). You can still > override > it with the traditional `video=' kernel command line option. > > If you're using a PS3 with a HDMI or DVI-D(+HDCP) monitor, please give it a > try. > > If it fails, please add `#define DEBUG' to drivers/ps3/ps3av.c, send me the > `Monitor Info' output in the kernel log (dmesg), and tell me which of the > PS3 video modes (1-13) work and which don't. ps3av has a quirk database for > monitors that advertise non-working modes, so it can probably be fixed. > (BTW, even if autodetect works fine, I always welcome this information) > > In case you have a big pile of monitors at your site, you don't have to reboot > to try them all. Just plug in the new monitor and run `ps3videomode -v 0' to > switch to the best resolution of the newly-connected monitor.
Hi, the autodetect code does not work correctly with a LG L226WTQ (native resolution 1680x1050). The detected mode (11) works fine without fullscreen, but goes out of range with '-f'. Resolutions w/o fullscreen: OK: 2, 3, 7, 8, 11, 12 BAD: 1, 4, 5, 6, 9, 10, 13 Resolutions with fullscreen: OK: 2, 3, 7, 8 BAD: 1, 4, 5, 6, 9, 10, 11, 12, 13 -- Håvard Espeland Monitor Info: size 96 avport: 00 monitor_id: 1e 6d 4e 56 d7 2a 03 00 03 11 monitor_type: 02 monitor_name: L226WTQ resolution_60: bits: 0000400d native: 00000000 resolution_50: bits: 00000000 native: 00000000 resolution_other: bits: 00000000 native: 00000000 resolution_vesa: bits: 00000001 native: 00000000 color space rgb: 01 color space yuv444: 00 color space yuv422: 00 color info red: X 028a Y 015e color info green: X 012b Y 0272 color info blue: X 0097 Y 0048 color info white: X 0141 Y 0151 color info gamma: 000000dc supported_AI: 00 speaker_info: 00 num of audio: 00 ps3av_hdmi_get_vid: Using supported resolution 11 ps3_av vuart_01: <- ps3av_probe:1016 <- ps3_system_bus_probe:376: vuart_01 ps3_system_bus_match:354: dev=5(vuart_02), drv=4(ps3_av): miss ps3_system_bus_match:354: dev=10(ioc0_01), drv=4(ps3_av): miss ps3_system_bus_match:354: dev=3(sb_04), drv=4(ps3_av): miss ps3_system_bus_match:354: dev=1(sb_05), drv=4(ps3_av): miss ps3_system_bus_match:354: dev=2(sb_06), drv=4(ps3_av): miss ps3_system_bus_match:354: dev=1(sb_07), drv=4(ps3_av): miss ps3_system_bus_match:354: dev=2(sb_08), drv=4(ps3_av): miss ps3_system_bus_match:354: dev=9(ioc0_02), drv=4(ps3_av): mis _______________________________________________ Linuxppc-dev mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-dev
